User manual CRESTRON RG UPX-2 UPX-2-1GB UPX-2-MSO

[. . . ] Crestron UPX-2 Universal Presentation Processor Reference Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. Windows® and Windows® XP are registered trademarks of Microsoft Corporation in the United States and other countries. ©2006 Crestron Electronics, Inc. Crestron UPX-2 Universal Presentation Processor Contents Universal Presentation Processor: UPX-2 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the assigned drive letter is for temporary use, no further steps are required. If one or more devices are added to the UPX-2 for continuous use, ensure they are connected and then reboot the UPX-2. The assigned drive letters will not change unless you change the connected devices or reboot without the device(s) connected. From this point forward, you can connect and disconnect other temporary use devices without rebooting. However, this will guarantee the drive assignment letter will remain consistent for long-term use. NOTE: The flash card can also be used to save and retrieve MediaMarker presentations. Programming Example The following programming example represents one possible solution for a typical embedded application. In VT Pro-e, open the "Embedded Application Property" window, enter a digital join number and select the default path that includes the filename. This can be one of the drives on the front of the UPX-2 (drive G through L) or a network drive. In SIMPL Windows, setup the following logic that allows you to open and close an embedded application, and report the open/close state of the application. NOTE: The following example requires the touchpanel interface symbol, a one-shot symbol, and a toggle symbol. 2. Reference Guide - DOC. 6286A Universal Presentation Processor: UPX-2 · 23 Universal Presentation Processor SIMPL Windows Programming, Embedded Applications ­ Excel On/Off Example Crestron UPX-2 This example has join #1 assigned to a button that is used to toggle the state of Excel. Join #2 is referred to as the "Open/Close Excel" state digital join. The feedback signal of the Open/Close state digital join is used to open and close the application. In this example, when fb 2 goes high, Excel opens, and when fb 2 goes low, Excel closes. Because clicking the "X" in the upper right corner can close the application, the toggle must be kept synchronized with the actual state of the application. The "Press" signal of the Open/Close state digital join can be used to determine the true state of the application. Here we use the falling edge of Press 2 through a one-shot symbol to reset the state of the toggle symbol. Now the toggle will remain properly synchronized if the user closes the application using the "X"(close window) control. Route the embedded application to the audience display using this logic. The touchpanel symbol (digital and analog joins), and an analog initialize symbol are used in this example. The 0d entry in the Analog Initialize symbol routes the application to the audience display. 24 ¥ UPX-2: Universal Presentation Processor Reference Guide ­ DOC. 6286A Crestron UPX-2 Universal Presentation Processor The touchpanel analog join is selected in the VT Pro-e project using the Display Output tab (in this example, join 25). Annotation Annotation tools can be created to annotate video windows, RGB windows, and embedded application files. [. . . ] Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. [. . . ]