User manual CRESTRON PMK-4L

[. . . ] Refer to the physical views (bottom, side, and front) of the PMK-4L, shown after this paragraph. NOTE: This mounting kit is to be used only with the TPS-4L and TPMC-4L wall-mounted series of touchpanels. PMK-4L Physical Views FOR DRYWALL NAILS (NOT INCLUDED) nails or screws to attach the PMK-4L are not supplied (length can vary). Metal Plate Secured to Stud FOR DRYWALL NAILS (NOT INCLUDED) FOR DRYWALL SCREWS (NOT INCLUDED) SECURE 18 AWG JUMPER WIRE IN NOTCH TO HANG CABLES AWAY FROM CUTTING TOOLS The plate is designed to provide the necessary support for a single touchpanel and can mount to the right or left side of a stud. A rectangular opening with the dimensions shown in the illustration after this paragraph must be made in the drywall. [. . . ] To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be nonwarranty, return freight costs shall be paid by the purchaser. STUD PRE-CONSTRUCTION METAL PLATE (2013238) MUST BE LEVEL BEFORE APPLICATION OF DRYWALL DRYWALL #04-40 x 1 ½ PAN HEAD SCREW (2007190) QTY. 4 2. COVER PLATE (2013239) TO COVER CUTOUT IN DRYWALL BEFORE TOUCHPANEL IS INSTALLED (SEE LOCAL BUILDING CODES) 3. CAUTION: Allow an air gap of at least 12 inches in the wall cavity above the touchpanel for heat dissipation. NOTE: Prior to mounting the touchpanel, ensure that the PMK-4L is flush with the drywall (no kinks or bends in the metal). One can purchase and attach a TMK-4L or an MMK-4L to keep the PMK-4L straight. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered. This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. Furthermore, this warranty does not cover any product that has had the serial number altered, defaced, or removed. [. . . ] Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation. Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. For assistance in your local time zone, refer to the Crestron website (www. crestron. com) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. [. . . ]