User manual CRESTRON PMK-3100L

[. . . ] Refer to the physical views (bottom, side, and front) of the PMK-3100L, shown after this paragraph. NOTE: This mounting kit is to be used only with the TPS-3100L series of touchpanels. PMK-3100L Physical Views FOR DRYWALL NAIL (PROVIDED BY OTHER) FOR DRYWALL SCREW (PROVIDED BY OTHER) drywall (shown after this paragraph). Standard drywall nails or screws to attach the PMK-3100L are not supplied (length can vary). Metal Plate Secured to Stud FOR DRYWALL NAIL (PROVIDED BY OTHER) SECURE 18 AWG BUS WIRE IN NOTCH TO HANG CABLES AWAY FROM DRYWALL CUTTING TOOLS. 6. 50 in (16. 50 cm) The plate is designed to provide the necessary support for a single touchpanel and can mount to the right or left side of a stud. [. . . ] 6291) for installation instructions. Attaching Cover PRE-CONSTRUCTION PLATE (2010617) MUST BE LEVEL BEFORE APPLICATION OF SHEET ROCK DRYWALL METAL COVER PLATE (2010622) STUD Crestron PMK-3100L Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be nonwarranty, return freight costs shall be paid by the purchaser. 2. (4) #6-32 X 1-12"L PAN HEAD SCREW (2007254) 3. CRESTRON Limited Warranty Further Inquiries If after reviewing this sheet, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: · In the US and Canada, call Crestron's corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. In Australia and New Zealand, call Crestron Control Solutions at +61-2-9737-8203. CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered. This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. [. . . ] Any implied warranties that may be imposed by law are limited to the terms of this limited warranty. This warranty statement supercedes all previous warranties. Trademark Information All brand names, product names, and trademarks are the sole property of their respective owners. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation. · · · · You can also log onto the online help section of the Crestron website (www. crestron. com) to ask questions about Crestron products. [. . . ]