User manual CRESTRON PMK-17L

[. . . ] The PMK-17L can also be used with the Isys i/OTM TPMC-17-CH-L and TPMC-17-QM-L wall mounted touchpanels. The PMK-17L is used for installation on two studs with a 16¼-inch (minimum) space between the studs. The PMK-17L includes an 18 AWG bus wire to secure touchpanel cabling prior to drywall installation and to avoid damaging the cables when the opening is routed. Refer to the physical views (bottom, side, and front) of the PMK-17L, shown after this paragraph. [. . . ] If the touchpanel is to be installed, refer to the latest revision of the TPS-12L/15L/17L Operations Guide (Doc. 6368 Pre-Construction Mount Kit: PMK-17L · 3 Pre-Construction Mount Kit Attaching Cover PRE-CONSTRUCTION PLATE (2013468) MUST BE LEVEL BEFORE APPLICATION OF SHEET ROCK. DRYWALL Crestron PMK-17L STUDS METAL COVER PLATE (2013467 SUPPLIED) USED TO COVER CUTOUT IN THE DRYWALL IF TOUCHPANEL IS NOT INSTALLED. (IF REQUIRED BY LOCAL BUILDING CODES) SCREW, #6-32, 1-1/2"L PAN HEAD SCREW (2007254) QTY. 8 NOTE: Prior to mounting the touchpanel, ensure that the PMK-17L is flush with the drywall (no kinks or bends in the metal). One can purchase and attach a TMK-17L or MMK-17L to keep the PMK-17L straight. 4 · Pre-Construction Mount Kit: PMK-17L Installation Guide - DOC. 6368 Crestron PMK-17L Pre-Construction Mount Kit Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. For assistance in your local time zone, refer to the Crestron website (www. crestron. com) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. As of the date of manufacture, the PMK-17L has been tested and found to comply with specifications for CE marking. Future Updates As Crestron adds improvements to the PMK-17L, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. Check the Crestron website periodically for manual update availability and its relevance. Updates are identified as an "Addendum" in the Download column. Installation Guide - DOC. 6368 Pre-Construction Mount Kit: PMK-17L · 5 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. [. . . ] Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the unexpired portion of the warranty. Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or implied, nor authorizes any other party to offer any warranty, including any implied warranties of merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law are limited to the terms of this limited warranty. This warranty statement supercedes all previous warranties. Trademark Information All brand names, product names, and trademarks are the sole property of their respective owners. [. . . ]