User manual CRESTRON IW TPS-4500 5000 6000

[. . . ] TPS ­ 6000, 5000 & 4500 INSTALLATION GUIDE INDEX: A) CONNECTING THE TPS PANEL USING THE TPS-IMC 1) CONNECTING THE TPS PANEL TO THE TPS-IMC 2) CONNECTING THE AUDIO TO THE TPS-IMC 3) CONNECTING THE VIDEO TO THE TPS-IMC 4) CONNECTING THE RGB TO THE TPS-IMC B) CONNECTING THE TPS PANEL USING THE TPS-IMC-BV 1) CONNECTING THE TPS PANEL TO THE TPS-IMC-BV 2) CONNECTING THE AUDIO TO THE TPS-IMC-BV 3) CONNECTING THE VIDEO TO THE TPS-IMC-BV 4) CONNECTING THE RGB TO THE TPS-IMC-BV C) CONNECTING THE TPS PANEL USING THE TPS-IMW 1) CONNECTING THE TPS PANEL TO THE TPS-IMW 2) CONNECTING THE AUDIO TO THE TPS-IMW 3) CONNECTING THE VIDEO TO THE TPS-IMW 4) CONNECTING THE RGB TO THE TPS-IMW D) CONNECTING ETHERNET TO THE TPS PANEL E) CUSTOM INSTALLATION & CABLES 1) TPS-BLOCK10 2) TPS CABLES CONNECTING THE TPS PANEL USING THE TPS-IMC Panel Connection for 6000, 5000 and 4500. - One supplied with each TPS-5000 and TPS-6000; add additional units to provide connectivity at multiple locations. [. . . ] (see below) Before RGB video can be enabled the TPS-XVGA must be installed. (For further information on installation please reference the TPS-XVGA manual) RGB(15PIN DB CONNECTION CONNECTING THE TPS PANEL USING THE TPS-IMC­BV Panel Connection for 6000 and 5000. Provides all of the functionality of a reqular TPS-IMC and adds buffering and breakout for the 10-pin balanced XVGA cable, and a 8-pin audio cable. 1) CONNECTING THE TPS PANEL TO THE TPS-IMC-BV NET/VIDEO(10PIN/RJ45) RGB(10PIN/RJ45) AUDIO(8PIN/RJ45) 2) CONNECTING THE AUDIO TO THE TPS-IMC-BV Audio is available for the TPS-6000 and 5000. The TPS-IMC-BV supports Balanced and Unbalanced inputs. 3) CONNECTING THE VIDEO TO THE TPS-IMC-BV Video is available for the TPS-6000, 5000 and 4500. Before video can be enabled the TPS-VID card must be installed. (For further information on installation please reference the TPS-VID manual) Connect to a video source only if the TPS-VID expansion card is installed in the touchpanel. For balanced video, use the RJ45. 4) CONNECTING THE RGB TO THE TPS-IMC-BV RGB is only available for the TPS-6000 and 5000. - Provides a 10-pin connector directly on the back of the touchpanel base. - TPS-IMC-BV ships with 15' triamese cable consisting of a 10-pin net/video cable, a 10pin balanced XVGA cable, and an 8-pin audio cable. Before RGB video can be enabled the TPS-XVGA-BV must be installed. (For further information on installation please reference the TPS-XVGA-BV manual) 15 PIN DB CONNECTION CONNECTING THE TPS PANEL USING THE TPS-IMW Panel Connection for 6000, 5000 & 4500 2-Gang wall-mount version of TPS-IMC. 1) CONNECTING THE TPS PANEL TO THE TPS-IMW 2) CONNECTING THE AUDIO TO THE TPS-IMW Audio is available for the TPS-6000 and 5000. TPS-IMW supports balanced and unbalanced audio. 3) CONNECTING THE VIDEO TO THE TPS-IMW Video is available for the TPS-6000, 5000 and 4500. TPS-IMW supports balanced and unbalanced video Before video can be enabled the TPS-VID card must be installed. (For further information on installation please reference the TPS-VID manual) Connect to a video source only if the TPS-VID expansion card is installed in the touchpanel. [. . . ] The TPS-BLOCK10 falls in line between the touchpanel and the IMC or IMC-BV breakout The total cable length between the touchpanel and the IMC or IMC-BV should be kept as short as possible, never to exceed 50'. Several manufacturers are providing solutions to allow mounting of one or more TPSBLOCK10's into their interface panels and pop-ups. TPS-BLOCK10 EXTRON AAP Panels are 2-Space AAP's and allow the mounting of a Single TPSBLOCK-10 assembly or (2) TPS BLOCK-10 assemblies. 2) TPS CABLES TPS-CBL-3/6/9 Maximum cable length is 30ft for the Net/Video cable. TPS-CBL-S3/6/9 Maximum cable length for the Net/Video and Audio cable is 30ft. TPS-CBL-T3/6/9 Maximum cable length for the Net/Video, Audio and RGB cable is 30ft. [. . . ]