User manual CRESTRON IO TPMC-10-DSW

[. . . ] Crestron TPMC-10-DSW Docking Assembly for TPMC-10 Operations and Installation Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2005 Crestron Electronics, Inc. Crestron TPMC-10-DSW Docking Assembly for TPMC-10 Contents Docking Assembly for TPMC-10: TPMC-10-DSW 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functions and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can create a program that allows you to set up the TPMC-10 to operate a Crestron control system using the Crestron programming tools: Crestron SystemBuilderTM and SIMPL Windows. These tools are intended for users with different levels of programming knowledge. The flexibility of each tool is proportional to the degree of programming expertise (i. e. , the more flexible, the more a programmer needs to know and account for). Of course, one can initiate programming using the easiest method (SystemBuilder) and use advanced techniques that are available from SIMPL Windows to customize the job. Earliest Version Software Requirements for the PC NOTE: Crestron recommends that you use the latest software to take advantage of the most recently released features. The following are recommended software version requirements for the PC: · SIMPL Windows version 2. 06 or later. Requires SIMPL+ Cross Compiler version 1. 1 and Library Update 352 or later. 8 · Docking Assembly for TPMC-10: TPMC-10-DSW Operations and Installation Guide - DOC. 6400 Crestron TPMC-10-DSW · · · Docking Assembly for TPMC-10 Crestron Database version 17. 3. 3 or later. Crestron Toolbox version 1. 01. 06 or later (Optional) Crestron SystemBuilder version 2. 0. 6 or later. Requires SIMPL Windows and Crestron Database 17. 3. 3. Programming with the Crestron SystemBuilder The easiest method of programming, but does not offer as much flexibility as SIMPL Windows. The Crestron SystemBuilder offers automatic programming for such residential and commercial applications as audio distribution, home theater, video conferencing, and lighting. The interface of this tool guides you through a few basic steps for designating rooms and specifying the control system, touchpanels, devices, and functionality. The Crestron SystemBuilder then programs the system, including all touchpanel projects and control system logic. The Crestron SystemBuilder is fully integrated with Crestron's suite of software development tools, including SIMPL Windows, VT Pro-e, Crestron Database, User IR Database, and User Modules Directory. The Crestron SystemBuilder accesses these tools behind the scenes, enabling you to easily create robust systems. Programming with SIMPL Windows NOTE: The following assumes that the reader has knowledge of SIMPL Windows. If not, refer to the extensive help information provided with the software. However, any 2-Series processor that is e-control enabled can be used. The control system requires either a plug-in Ethernet card, or a built-in Ethernet port in order to incorporate a TPMC-10 into the system. SIMPL Windows is Crestron's software for programming Crestron control systems. It provides a well-designed graphical environment with a number of workspaces (i. e. , windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. This section describes a sample SIMPL Windows program that includes a TPMC-10-DSW as well as a TPMC-10. Configuration Manager is where programmers "build" a Crestron control system by selecting hardware from the Device Library. In Configuration Manager, drag the MC2E from the Control Systems folder of the Device Library and drop it in the upper pane of the System Views. [. . . ] To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. [. . . ]