User manual CRESTRON IO DA-1700CW

[. . . ] Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW Operations and Installation Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2005 Crestron Electronics, Inc. Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW Contents Docking Assembly for STX-1700CW/CXPW: DA-1700CW 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functions and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NOTE: The following assumes that the reader has knowledge of SIMPL Windows. If not, refer to the extensive help information provided with the software. This section explains how to create a SIMPL Windows program that includes a DA-1700CW. Configuration Manager is where programmers "build" a Crestron control system by selecting hardware from the Device Library. In Configuration Manager, drag the PRO2 from the Control Systems folder of the Device Library and drop it in the upper pane of the System Views. The PRO2 with its associated communication ports is displayed in the System Views upper pane. PRO2 System View The System Views lower pane displays the PRO2 system tree (refer to graphic below). This tree can be expanded to display and configure the communications ports. Expanded PRO2 System Tree 10 · Docking Assembly for STX-1700CW/CXPW: DA-1700CW Operations and Installation Guide - DOC. 6104A Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW C2Net-Device Slot in Configuration Manager The C2Net-Device Slot can accept a DA-1700CW. Once a DA-1700CW is configured in a C2Net-Device Slot, the slot allows Cresnet communication between the DA-1700CW and the control system. NOTE: Refer to the appropriate touchpanel manual for information on developing a program that includes a touchpanel to be docked in the docking station. In Configuration Manager, drag the BB/DA-1700CW from the Cresnet Control Modules | Cresnet I/O Control & Other Modules folder of the Device Library and drop it on the PRO2 C2Net-Device slot in System Views. The System Views upper pane displays the BB/DA-1700CW device icon below the PRO2 graphic. The PRO2 system tree displays the BB/DA-1700CW in Slot 9, with a default Net ID of 51. Refer to the graphic below. C2Net Device, Slot 9 Setting the Net ID in Device Settings Double-click the BB/DA-1700CW icon in the upper pane to open the "Device Settings" window (shown below). The Net ID can be changed in this window using the Net ID tab. "Device Settings" Window NOTE: SIMPL Windows automatically changes Net ID values of a device added to a program if a duplicate device or a device with the same default Net ID already Operations and Installation Guide - DOC. 6104A Docking Assembly for STX-1700CW/CXPW: DA-1700CW · 11 Docking Assembly for STX-1700CW/CXPW Crestron DA-1700CW exists in the program. Always ensure that the network device Net IDs set via Viewport match the ones in your SIMPL Windows program. BB/DA-1700CW Symbol in Programming Manager Programming Manager is where programmers "program" a Crestron control system by assigning signals to symbols. The graphic below shows the BB/DA-1700CW symbol in the Detail View of the Programming Manager. Detail View of the BB/DA-1700CW Symbol in SIMPL Windows' Programming Manager NOTE: All signals listed in the tables below and on the next page are DIGITAL signals unless noted otherwise. A digital signal can be high (logic level of 1), low (logic level of 0), and also have rising edge (when it goes from low to high) and falling edge (from high to low) transitions. BB/DA-1700CW Symbol Input Description INPUT UNLATCH (Unlock in earlier versions of SIMPL Windows. ) FUNCTION(S) Edge sensitive. Unlatches the back box for 5-seconds when the edge of the signal is received. The back box may not be unlatched for 1-second after the latch is engaged. BB/DA-1700CW Symbol Output Descriptions OUTPUTS FUNCTION(S) UNLATCHED 1 when the latch is open, 0 when the latch is closed. (Unlock-FB in earlier versions of SIMPL Windows. ) PANELPRESENT 1 when the touchpanel is docked, 0 when the touchpanel is not docked. [. . . ] Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. [. . . ]