User manual CRESTRON IO C2N-SDC

[. . . ] Crestron C2N-SDC Shade & Drape Motor Controller Operations & Installation Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. 2005 Crestron Electronics, Inc. Crestron C2N-SDC Shade & Drape Motor Controller Contents Shade & Drape Motor Controller: C2N-SDC 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features & Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Physical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Industry Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Network Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Identity Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Hardware Hookup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Two-Gang Box Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4"x 4" Box Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Programming Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Earliest Version Software Requirements for the PC . . . . . . . . . . 18 Crestron D3 Pro System Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Programming with SIMPL Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Example Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Uploading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Communication Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Uploading a SIMPL Windows Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Problem Solving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Further Inquiries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Future Updates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Return and Warranty Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Merchandise Returns / Repair Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 CRESTRON Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Operations & Installation Guide - DOC. 6316 Shade & Drape Motor Controller: C2N-SDC · i Crestron C2N-SDC Shade & Drape Motor Controller Shade & Drape Motor Controller: C2N-SDC Introduction Features & Functions The Crestron C2N-SDC is a shade and drape motor control Cresnet® slave module designed to control two bi-directional 1/3 HP motors that drive shades and drapes. [. . . ] In Configuration manager, drag the PRO2 from the Control Systems folder of the Device Library and drop it in the upper pane of the System Views. The PRO2 with its associated communication ports is displayed in the System Views upper pane. 6316 Shade & Drape Motor Controller: C2N-SDC · 19 Shade & Drape Motor Controller Crestron C2N-SDC The System Views lower pane displays the PRO2 system tree (refer to the following graphic). This tree can be expanded to display and configure the communication ports. Expanded PRO2 System Tree C2Net-Device Slot in Configuration Manager To incorporate a C2N-SDC into the system, drag the C2N-SDC from the Cresnet Control Modules | Cresnet Shade Drape Controllers folder of the Device Library and drop it in System Views. The PRO2 system tree displays the C2N-SDC in Slot 9, with a default Net ID of 0E as shown in the following illustration. NOTE: The first C2N-SDC in a system is preset with a Net ID of 0E when its symbol is dragged into the upper pane of System Views. Additional units are assigned different Net ID numbers as they are added. 20 · Shade & Drape Motor Controller: C2N-SDC Operations & Installation Guide - DOC. 6316 Crestron C2N-SDC C2Net Device, Slot 9 Shade & Drape Motor Controller Setting the Net ID in Device Settings Double-click the C2N-SDC icon to open the "Device Settings" window. If necessary, select the Net ID tab to change the Net ID as shown in the following figure. Operations & Installation Guide - DOC. 6316 Shade & Drape Motor Controller: C2N-SDC · 21 Shade & Drape Motor Controller "Device Settings" Window Crestron C2N-SDC NOTE: SIMPL Windows automatically changes the Net ID values of a device added to a program if a duplicate device or a device with the same default Net ID already exists in the program. Always ensure that the hardware and software settings of the Net ID match. For Net ID hardware setting details, refer to "Identity Code" on page 8. C2N-SDC Symbol in Programming Manager Programming Manager is where programmers "program" a Crestron control system by assigning signals to symbols. The following graphic shows the C2N-SDC symbol in the SIMPL Windows' Programming Manager. 22 · Shade & Drape Motor Controller: C2N-SDC Operations & Installation Guide - DOC. 6316 Crestron C2N-SDC Shade & Drape Motor Controller C2N-SDC SIMPL Windows Symbol The C2N-SDC module operates two shade and drape bi-directional motors (labeled Sh1 and Sh2) in an identical manner. The following tables describe the C2N-SDC control signals for Sh1, the same control signals repeat for Sh2. Operations & Installation Guide - DOC. 6316 Shade & Drape Motor Controller: C2N-SDC · 23 Shade & Drape Motor Controller C2N-SDC Control Signals SIGNAL TYPE AND NAME DESCRIPTION Crestron C2N-SDC Digital output: Indicates that Shade 1 has received an open or <Sh1_MoveCommanded> close command (momentary, full or jog). The output remains high until a stop command is sent, or until <Sh1_MaxTime> or <Sh1_JogTime> has expired. The output will remain high if Shade 1 reaches the upper or lower mechanical limit of travel and has stopped, but the timers have not yet expired. High/1 = Shade 1 move commanded (timer not expired); Low/0 = Shade 1 stopped (timer expired, or Stop command sent, or Momentary command released) Digital input: <Sh1_OpenMomentary> Opens Shade 1 on the rising edge of the input, and stops on release or when <Sh1_MaxTime> expires. High/1 (rising edge) = Open; Low/0 (falling edge) = Stop Closes Shade 1 on the rising edge of the input, and stops on release or when <Sh1_MaxTime> expires. [. . . ] Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. 07647, or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. [. . . ]