User manual CRESTRON DTT-18

[. . . ] Crestron DTT-18 DualTouchTM Technology Touchpanel Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc DualTouchTM Technology Touchpanel Crestron DTT-18 Contents DualTouchTM Technology Touchpanel: DTT-18 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select the exit icon to leave this menu without making any changes. 9. Color ­ Provides a color temperature selection of 9300K, 6500K, 5000K, and a user option that allows an independent adjustment of red, green and blue. Press Enter to save. NOTE: Manual changes invalidate the standard profile settings. Operations Guide ­ DOC. 6290 DualTouchTM Technology Touchpanel: DTT-18 · 15 Crestron DTT-18 DualTouchTM Technology Touchpanel 10. Backlight ­ Use the (+)/(-) buttons to increase or decrease the backlight brightness. Language ­ Use the (+)/(-) buttons to select a language for the display adjustment menus. Default is English. Using the Pen While working with the DTT-18, you can rest your hand on the surface of the display screen, just as if you were drawing on a sheet if paper. The pen is activated as soon as it enters proximity, about 0. 2 inches (5 mm) above the surface. This allows you to position the screen cursor before touching the pen tip to the surface. When the pen tip contacts the surface of the DTT-18, the tip switch is activated. Raising the tip above the surface of the DTT-18 is the same as releasing a mouse button. NOTE: The switch and eraser end of the pen currently have no independent function. NOTE: Always store the pen in the pen stand to prevent damage to the tip. Worn tips feel more drag when you draw, or it seems as if you are scratching the overlay with your pen. Replacement pens and a 5-pack of replacement pen nibs are available from Wacom at: http://wacomdirect. wacom. com. 16 · DTT-18: DualTouchTM Technology Touchpanel Operations Guide ­ DOC. 6290 DualTouchTM Technology Touchpanel Grasp the worn tip with a pair of needlenose pliers, tweezers, or similar instrument and pull out the tip. Crestron DTT-18 Firmly slide the new tip (square end first) into the barrel of the pen and press in until it stops. NOTE: A badly worn pen tip may damage the surface. Cleaning Keep the pen and screen surface clean. Dust and dirt particles can stick to the pen and cause wear to the screen surface. · To clean the outer casing, stand, and pen, use a soft cloth and a mild detergent (such as dishwashing liquid) diluted in water. To clean the surface of the display screen, use an anti-static cloth or very slightly dampened cloth. Apply only very light pressure and do not make the screen surface wet. Never use detergents or solvents to clean the screen. · Alternative Mounting The DTT-18 may be removed from the adjustable stand and remounted to a VESA® conforming mount arm or stand. The Video Electronics Standards Association (VESA) is an international non-profit corporation that supports and sets industrywide interface standards for the PC, workstation, and computing environments. VESA's Flat Display Mounting Interface (FDMI) Standard defines a set of mounting interface standards for the complete range of flat displays with viewing areas ranging in size from 102 mm (4") to 2286 mm (90") diagonal. [. . . ] 07647, or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. [. . . ]