User manual CRESTRON DTT-15V2

[. . . ] Crestron DTT-15V2 DualTouchTM Technology Touchpanel Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2005 Crestron Electronics, Inc DualTouchTM Technology Touchpanel Crestron DTT-15V2 Contents DualTouchTM Technology Touchpanel: DTT-15V2 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Connect the power supply line cord to an AC outlet and the power supply adaptor. Select the exit icon to leave this menu without making any changes. 9. Backlight ­ Use the (-)/(+) buttons to decrease or increase the backlight brightness. Color ­ Provides a color temperature selection of 9300K, 6500K, 5000K, DIRECT (no adjustment to the incoming signal) and a USER option to use the independent RGB adjustment. icon to allow an independent adjustment of red, green and Click the blue. Defaults are shown as follows. 14 DualTouchTM Technology Touchpanel: DTT-15V2 Operations Guide ­ DOC. 6342 DualTouchTM Technology Touchpanel Crestron DTT-15V2 NOTE: Manual changes invalidate the standard profile settings. Language ­ Use the (-)/(+) buttons to select a language for the display adjustment menus. Default is English. The Kensington® Security Slot The Kensington Security Slot is an industry standard that gives customers the best option for the physical security of computer and electronic equipment. To prevent unauthorized removal, you can attach one end of a Kensington security cable to this slot and the other end to an immovable object. Refer to the Kensington website for additional details (http://www. kensington. com). Using the Pen While working with the DTT-15V2, you can rest your hand on the surface of the display screen, just as if you were drawing on a sheet if paper. The pen is activated as soon as it enters proximity, about 0. 2 inches (5 mm) above the surface. This allows you to position the screen cursor before touching the pen tip to the surface. When the pen tip contacts the surface of the DTT-15V2, the tip switch is activated. Raising the tip above the surface of the DTT-15V2 is the same as releasing a mouse button. Worn tips feel more drag when you draw, or it seems as if you are scratching the overlay with your pen. Replacement pens and a 5-pack of replacement pen nibs are available from the Wacom website (http://wacomdirect. wacom. com). Grasp the worn tip with a pair of needle-nose pliers, tweezers, or similar instrument and pull out the tip. Firmly slide the new tip (square end first) into the barrel of the pen and press in until it stops. NOTE: A badly worn pen tip may damage the surface. Operations Guide ­ DOC. 6342 DualTouchTM Technology Touchpanel: DTT-15V2 15 Crestron DTT-15V2 Cleaning DualTouchTM Technology Touchpanel Keep the pen and screen surface clean. Dust and dirt particles can stick to the pen and cause wear to the screen surface. · To clean the outer casing, stand, and pen, use a soft cloth and a mild detergent (such as dishwashing liquid) diluted in water. To clean the surface of the display screen, use an anti-static cloth or very slightly dampened cloth. [. . . ] Enclose aa note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. 07647, or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. [. . . ]