User manual CRESTRON CUTOUT DIMENSIONS AND MOUNTING GUIDE

[. . . ] 5 Water Resistant Cover Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 LC-1000, CT-1000 & APAD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 TPMC-10-DSW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 TPS-12L & TPS-12G-QM-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 4926B 3 Crestron Trim Ring The Trim Ring is an optional accessory for use with the preconstruction wall mounting kit and back box to provide a smooth edge around the opening and compensate for minor drywall cutout imperfections. Examples of Post Construction Wall Mount Kit with Trim Ring. Cutout Dimensions & Mounting Options Mud Ring The Mud Ring is an optional accessory used to compensate for significant drywall cutout imperfections by providing a suitable surface for the application of plaster for a finished appearance. Examples of Post Construction Wall Mount Kit with Mud Ring. 4 Crestron Doc. 4926B Cutout Dimensions & Mounting Options Cutout Dimensions & Mounting Options Crestron Rack Mount The Rack Mount is an optional mounting accessory that allows for the installation of a touchpanel in a 19-inch EIA equipment rack. RMK-12L RMK-15L RMK-17L RMK-3100L RMK-4000L Model RMK-12L RMK-15L RMK-17L RMK-3100L RMK-4000L Height 13. 97 inches (35. 49 cm) 15. 72 inches (39. 93 cm) 15. 72 inches (39. 93 cm) 8. 72 inches (22. 15 cm) 10. 47 inches (26. 59 cm) Occupied Rack Spaces Eight rack spaces Nine rack spaces Nine rack spaces Five rack spaces Six rack spaces Cutout Dimensions & Mounting Options Crestron Doc. 4926B 5 Crestron Water Resistant Cover Kits Cutout Dimensions & Mounting Options The Water Resistant Cover Kit protects touchpanels wherever they may be exposed to moisture or dampness such as basements, pools, boathouses, bathrooms, laundries and garages. The urethane covers install easily over the faceplate of the touchpanel. Without hindering normal use, they effectively prevent liquids and other airborne materials from settling onto the face of the panel. CT/LC-WPK Water Resistant Cover for CT-1000 and LC-1000 TPS-WPK Water Resistant Cover for TPS-2000 NOTE: Please note that Crestron touchpanels are not intended to be exposed to the elements or used under conditions exceeding the environmental limits of 50° to 113°F (10° to 45°C), 10% to 90% RH (non-condensing). 6 Crestron Doc. 4926B Cutout Dimensions & Mounting Options Cutout Dimensions & Mounting Options Crestron LC-1000, CT-1000 & APAD Pre-Construction Mounting Options for the LC-1000, CT-1000 & APAD Touchpanels PRE-CONSTRUCTION KITS Back Box Kit Pre-Construction Kit Mud Mount Kit Trim Mount Kit MODEL NUMBER BB-1000L PMK-1000L MMK-1000L TMK-1000L Post-Construction Mounting Options for the LC-1000, CT-1000 & APAD Touchpanels POST-CONSTRUCTION KITS Wall Mount Mud Kit Wall Mount Trim Kit Water Resistant Cover MODEL NUMBER WMKM-1000L WMKT-1000L CT/CL-WPK NOTE: Early production units ship with two mounting brackets (and other parts) that allowed the low-voltage touchpanel to be installed directly into a mounting surface. Cutout for Trim Ring Mount Kits: TMK-1000L & WMKT-1000L Back Box Dimensions for BB-1000L NOTE: For additional mounting information, refer to the latest version of the Crestron Touchpanel Mounting Quick Start, Doc. 6140, available from the Crestron website (www. crestron. com). Cutout Dimensions & Mounting Options Crestron Doc. 4926B 7 Crestron TPMC-10-DSW Cutout Dimensions & Mounting Options The TPMC-10-DSW is a wall-mounted docking station for the Crestron® TPMC-10 Isys i/OTM WiFi Touchpanel. The TPMC-10-DSW, recessed in the wall, turns the TPMC-10 into a fully-functioning wall mounted touchpanel, and charges its built-in battery at the same time. Cutout for TPMC-10-DSW NOTE: For additional details, refer to the latest version of the TPMC-10-DSW Operations and Installation Guide (Doc. 4926B Cutout Dimensions & Mounting Options Cutout Dimensions & Mounting Options Crestron TPS-12L & TPS-12G-QM-L Pre-Construction Mounting Options for the TPS-12L & TPS-12G-QM-L Touchpanels PRE-CONSTRUCTION KITS Back Box Kit Pre-Construction Kit Mud Mount Kit Trim Mount Kit MODEL NUMBER BB-12L PMK-12L MMK-12L TMK-12L Post-Construction Mounting Options for the TPS-12L & TPS-12G-QM-L Touchpanels POST-CONSTRUCTION KITS Wall Mount Mud Kit Wall/Lectern Mount Trim Kit Rack-Mount Kit MODEL NUMBER WMKM-12L WMKT-12L RMK-12L TPS-12L & TPS-12G-QM-L Cutout Dimensions Back Box BB-12L Dimensions Cutout Dimensions & Mounting Options Crestron Doc. 4926B Cutout Dimensions & Mounting Options Cutout Dimensions & Mounting Options Crestron TPS-3100L Pre-Construction Mounting Options for the TPS-3100L Touchpanels PRE-CONSTRUCTION KITS Back Box Kit Pre-Construction Kit Mud Ring Only Trim Ring Only MODEL NUMBER BB-3100L PMK-3100L MMK-3100L TMK-3100L Post-Construction Mounting Options for the TPS-3100L Touchpanels POST-CONSTRUCTION KITS Wall/Lectern Mount Kit with Trim Ring Wall Mount Kit with Mud Ring Architectural Faceplates Rack Mount Kit MODEL NUMBER WMKT-3100L WMKM-3100L TPS-FPAR3100L RMK-3100L TPS-3100 Cutout Dimensions Back Box BB-3100L Dimensions WARNING: The TPS-3100L is physically different from the discontinued TPS-3000L and the mounting options and cutout dimensions are not interchangeable. NOTE: For additional TPS-3100 mounting information, refer to the latest version of the Crestron Touchpanel Mounting Quick Start, Doc. 6140, available from the Crestron website (www. crestron. com). Cutout Dimensions & Mounting Options Crestron Doc. 4926B 13 Crestron Cutout Dimensions & Mounting Options TPS-4000L Pre-Construction Mounting Options for the TPS-4000L Touchpanels PRE-CONSTRUCTION KITS Back Box Kit Pre-Construction Kit Mud Ring Only Trim Ring Only MODEL NUMBER BB-4000L PMK-4000L MMK-4000L TMK-4000L Post-Construction Mounting Options for the TPS-4000L Touchpanels POST-CONSTRUCTION KITS Wall/Lectern Mount Kit with Trim Ring Wall Mount Kit with Mud Ring Architectural Faceplates Rack Mount Kit MODEL NUMBER WMKT-4000L WMKM-4000L TPS-FPAR4000L RMK-4000L TPS-4000L Cutout Dimensions NOTE: For additional TPS-4000L mounting information, refer to the latest version of the Crestron Touchpanel Mounting Quick Start, Doc. 6140, available from the Crestron website (www. crestron. com). Back Box BB-4000L Dimensions 14 Crestron Doc. 4926B Cutout Dimensions & Mounting Options Cutout Dimensions & Mounting Options TPS-4500L, TPS-4500LV & TPS-5000L Crestron Pre-Construction Mounting Options for the TPS-4500L, TPS-4500LV, & TPS-5000L Touchpanels PRE-CONSTRUCTION KITS Back Box Kit MODEL NUMBER BB-5000L Post-Construction Mounting Options for the TPS-4500L, TPS-4500LV, & TPS-5000L Touchpanels POST-CONSTRUCTION KITS Architectural Faceplates Rack Mount Kit MODEL NUMBER TPS-FPAR5000L RMK-5000L TPS-4500L, TPS-4500LV & TPS-5000L Cutout Dimensions HORIZONTAL MEASUREMENTS H1 =12. 920 in (32. 817 cm) H2 =1. 056 in (2. 682 cm) H3 =10. 951 in (27. 816 cm) H4 =2. 054 in (5. 217 cm) H5 =8. 953 in (22. 741 cm) H6 =4. 305 in (10. 935 cm) H7 =4. 452 in (11. 308 cm) H8 =5. 282 in (13. 416 cm) H9 =2. 500 in (6. 350 cm) VERTICAL MEASUREMENTS V1 =10. 223 in (25. 966 cm) V2 =10. 043 in (25. 509 cm) V3 =9. 866 in (25. 060 cm) V4 =0. 179 in (0. 455 cm) V5 =0. 089 in (0. 226 cm) RADIUS MEASUREMENTS R1 =0. 161 in (0. 409 cm) typical R2 =0. 312 in (0. 792 cm) typical Cutout Dimensions & Mounting Options Crestron Doc. 4926B 15 Crestron Back Box BB-5000 Dimensions Cutout Dimensions & Mounting Options 16 Crestron Doc. 4926B Cutout Dimensions & Mounting Options Cutout Dimensions & Mounting Options Crestron TPS-6000L Pre-Construction Mounting Options for the TPS-6000L Touchpanels PRE-CONSTRUCTION KITS Back Box Kit MODEL NUMBER BB-6000L Post-Construction Mounting Options for the TPS-6000L Touchpanels POST-CONSTRUCTION KITS Architectural Faceplates Rack Mount Kit MODEL NUMBER TPS-FPAR6000L RMK-6000L BB-6000 Cutout Dimensions Cutout Dimensions & Mounting Options Crestron Doc. 4926B 17 Crestron Back Box BB-6000L Dimensions Cutout Dimensions & Mounting Options 18 Crestron Doc. 4926B Cutout Dimensions & Mounting Options Cutout Dimensions & Mounting Options Crestron TPS-4L Pre-Construction Mounting Options for the TPS-4L Touchpanels PRE-CONSTRUCTION KITS Back Box Kit Wall Mount Kit Trim Ring Mud Ring MODEL NUMBER BB-4L PMK-4L TMK-4L MMK-4L Post-Construction Mounting Options for the TPS-4L Touchpanels POST-CONSTRUCTION KITS Lectern/Wall Mounting Kit with Trim Ring Wall Mount Kit with Mud Ring MODEL NUMBER WMKT-4L WMKM-4L TPS-4L Pre Construction Cutout Template Dimensions TPS-4L Post Construction Cutout Template Dimensions Cutout Dimensions & Mounting Options Crestron Doc. [. . . ] Weight (filled) is the weight with the maximum number of modules installed. 30 Crestron Doc. 4926B Cutout Dimensions & Mounting Options Cutout Dimensions & Mounting Options Crestron C2N-SDC and C2N-SDC-DC The C2N-SDC and C2N-SDC-DC may be mounted in a two-gang electrical box or a 4" x 4" (1900) electrical box. Ensure that you are using a box with sufficient depth (minimum 1 ½") to accommodate the wires and connectors required. Cutout Dimensions & Mounting Options Crestron Doc. 4926B 31 Crestron CLS-C6 and CLS-C6M Cutout Dimensions & Mounting Options The CLS-C6 and CLS-C6M mount in a standard 4-gang electrical box. 32 Crestron Doc. [. . . ]