User manual CRAFTSMAN 138.74544

[. . . ] To reduce the risk of electric shock, this tool has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. [. . . ] An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Use of any other accessories or attachments will increase the risk of injury. Keep the air vents clean and free of debris to avoid overheating the motor. Never carry the unit by the extension cord or yank extension cord to disconnect unit. If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk. Refer to them frequently and use them to instruct others who may use this power tool. If you loan someone this power tool, loan them these instructions also. T im e Type of current Type or a characteristic of current Double-insulated construction Do not expose to rain or use in damp locations To reduce the risk of injury user must read and u n d e r s t a n d o p e r a t o r 's m a n u a l b e f o r e u s in g t h is p ro d u c t. Always wear safety goggles or safety glasses w it h s id e s h ie ld s a n d , a s n e c e s s a r y , a f u ll f a c e s h ie ld w h e n o p e r a t in g t h is p r o d u c t . When working outdoors with a product, use an extension designated with "WA" on the cord's jacket. Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation. Position the cord so that it will not get caught on lumber, tools, or other obstructions while you are working with a power tool. Never use cord since touching the damaged area could cause elec trical shock resulting in serious injury. The string trimmer is equipped with a front handle assembly for ease of operation and to prevent loss of control. A convenient cord retainer helps keep the extension cord connection secure during string trimmer operation. The rotating rear handle on the string trimmer can be locked in two different positions for ease of use when edging. The string trimmer can be adjusted to different extension points for ease of use. 1-888-266-7096 If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. Remove supplied screw with a phillips screwdriver from the trimmer head. [. . . ] Strings will not feed when bumping during use as per instructions: Strings have become stuck together due to heat or storage time. Remove spool and replace with new line or new spool assembly as per instructions in manual. Try another extension cord or connect into another wall receptacle socket on a different circuit. 1 2 3 4 5 6 7 8 9 Part Number 31101509 34101185-2 33300346 31102509 31101510 31102510 34103510 33901510 3220811 Description Auxiliary handle Knob Edging guide 12" Trimmer guard Bump & feed housing assembly Dual line bump & feed spool Dual line bump feed spool cover Bump & feed spool spring M4 x16 Guard screw Qty. [. . . ]