User manual COWON IAUDIO E2 VERSION 1.1

[. . . ] Users are also encouraged to comply with the relevant laws and regulations. + As soon as you purchase the product, visit the website (http://www. COWON. com), and become a registered member. + This manual is based on product specifications, and various exemplary texts, illustrations, pictures, detailed functions and H/W and S/W specifications contained herein can be altered without any prior notice by the copyright owner. owns the license to the BBE name and information as applied to this product, in compliance with USP4638258, 5510752 and 5736897. [. . . ] - When charging the player for the first time or the player has not been charged for an extended time, fully charge the battery before use. To prolong the life of the battery, it is recommended that you charge the device frequently, as opposed to fully discharging and then charging the device. - For safety during charging, use USB cable approved by COWON SYSTEMS, Inc. The red LED lamp appears when charging, and it takes about 1. 5 hours before it is fully charged. The green LED lamp appears when fully charged. iAUDIO E2 11 Before you start! +Connecting and Disconnecting the PC 1 PC 2 2 1 6. Safely remove the hardware and disconnect the USB cable. 3 4 DRAG 1. Check whether the LED lamp on the back of iAUDIO E2 turns green (fully charged) or red (charging in progress). The contents of iAUDIO E2 can be viewed by using My Computer or Windows Explorer while it is connected. When done, click the icon on the system tray to safely remove iAUDIO 9 from the PC. 12 iAUDIO E2 - The player can recognize up to 100 folders, and up to 1, 000 files - Disconnect the product after performing `Safely remove hardware' function. - The following message may appear randomly, but it does not indicate that the product is abnormal condition. - If your operating system does not display the `Safe To Remove Hardware' window, disconnect the player after all transfer operations are completed. - Only simple file transfer operation is available for Linux and Mac OS. Before you start! +Firmware Upgrade Firmware is software that is embedded within the hardware. Upgrading it can enhance system stability and provide additional features. The performance and usage of iAUDIO E2 may be changed through the firmware without any prior notice, and slight malfunctioning may occur in some firmware. - Fully charge the player before upgrading the firmware. - Back up any important data before the firmware upgrade as any data stored on the device may be deleted during the process. COWON accepts no liability for any loss of data. How to Upgrade the Firmware 1. Download the latest firmware from the SUPPORT section of the website (http://www. COWON. com). Perform `Safely remove the hardware' function before disconnecting the USB cable. . When you turn on iAUDIO E2, the firmware will be upgraded automatically. Turn on iAUDIO E2 again, and confirm that a music file can play back normally. iAUDIO E2 13 Basic Use +LED Lamp Description The iAUDIO E2 LED can display either green or red. The following table provides a detailed description of the colors and the LED status. Function POWER ON POWER OFF Playback Charging Charging complete Charging error Discharged Firmware upgrade . . . [. . . ] For your information, RESET will just disconnect the power and does not damage the product or delete any files stored on the device. + Memory capacity of the player is different or smaller than specified. The memory capacity indicated by Windows may be different from that indicated by the memory manufacturer. The actual capacity will be reduced from the original size because some space of the memory should be used as the system area for normal operation. 22 iAUDIO E2 +Troubleshooting + The player does not play properly when memory is full. For the player to function properly, it requires at least 5 MB of space for saving settings and other system files. + PC connection is unstable. Connect the player directly to the USB port of the PC. When connected to a laptop, try removing other connected USB hardware, or try connecting to PCMCIA USB host card. Fully charge the product, or connect the product to the pc while charging with genuine COWON adapter. + Files do not appear in the product when files are transferred with a MAC computer. Format the product as MS-DOS(FAT), and transfer the files. iAUDIO E2 23 + Battery Replacement + Product Disposal The rechargeable batteries have limited number of charge cycles, and it will require a replacement as capacity to hold power will eventually diminish. [. . . ]