User manual COWON IAUDIO F2

[. . . ] 1. 1 E 2 Before Using Your iAUDIO F2 Legal Notice COPYRIGHT NOTICE · COWON is a registered trademark of COWON SYSTEMS, INC. · This product is intended for personal use only and may not be used for any commercial purpose without the written consent of COWN SYSTEMS, INC. · Information in this document is copyrighted by COWON SYSTEMS, INC. and no part of this manual may be reproduced or distributed without the written permission of COWN SYSTEMS, INC. [. . . ] - Up to 24 frequencies can be stored in Preset Channels. Using Advanced Features 1. In the Settings / Timer menu, select the Wakeup Mode and set it to FM Recording 3. In the Settings / Timer menu, select the Wakeup Time and set it to desired time for recording. The player will turn on automatically at the specified time and starts recording the FM Radio signal - Recorded files are stored in "RECORD" folder - During recording, battery consumption is higher than other playback operation. - Sound quality and capacity of recordings may vary according to reception quality and recording settings. Recording Using Built-In Microphone Recording with Built-in Microphone Recording FM Radio 1. Press button again to stop recording. Scheduled Recording of FM Radio Time setup Wakeup mode Wakeup time Sleep Auto off 1. Make sure that the recording mode is set to Voice in Settings ­ Recording- Recording Mode menu. Switch to the Record mode by pressing button and then choose Record icon. During recording, press the button to pause or resume the recording 5. To play recorded files, press button and listen on the earphones Time setup Wakeup mode Wakeup time Sleep Auto off Timer Timer Wakeup mode Off Music Alarm FM Alarm FM Record Off 1M Off 1M iAUDIO F2 iAUDIO F2 32 Using Advanced Features Recording with Line-In Connection Linein bps Voice bps FM bps Mic volume Line volume Auto Sync Recording mode Using Advanced Features 3. 4. Viewing Images Recording 128K 64K 128K High 4 Off Line In Voice 33 Wallpaper SlideShow Pivot CDP Playback 1. Use the Line-In cable to connect the headphone jack of your audio source device with the Line-In jack of iAUDIO F2. Make sure the recording mode is set to Line-In in Settings ­ Recording ­ Recording Mode menu. Switch to the Record mode by pressing button and then choose Record icon. Start playing the CDP and then press button on iAUDIO F2 to start recording. To listen to the recorded track, connect the earphones and press button. - Recorded files are stored in "VOICE" folder if recorded via built-in microphone, or in "RECORD" folder if recorded via Line-In cable. - To use JetEffect, Fast-forward and rewinding capabilities, the recorded audio files should be played in Music mode. - If the player was in Record mode before turning the player off, the player will start with the Record mode when turned on again. - Sound quality and capacity of recordings may vary according to reception quality and recording settings. After the player is turned on, select Picture mode by pressing button then choosing Picture icon. Press to zoom in and out of an image and press during zoom to move about within the image. [. . . ] RESET button simply powers off the player and does not affect the player in any other way. 4. Downloading Logo File You can download a logo file to change the logo screen that appears when iAUDIO powers on. When the "Open" window appears, select the desired logo file and click Open. Then the logo file is downloaded and applied. Q The player is on but there is no sound. [. . . ]