User manual CORSAIR HX1000W

[. . . ] If, prior to using the Product, you decide you are unwilling to agree to the terms of this agreement, promptly return the Product and the accompanying items (including written materials and binders or other containers) to Corsair Memory or the Corsair Memory authorized distributor from whom you obtained the Product and accompanying items. If you have already paid for the Product, provide us with your proof of purchase and we will refund the fees you have paid for these items to you. Limited Warranty and Limitation of Liability The Product is guaranteed for sixty (60) months from the date of delivery to the end-user against defects in materials or workmanship. During this period, the Product will be repaired or have parts replaced, at our discretion, provided that: (I) the Product is returned to the agent from whom it was purchased with shipping prepaid; (II) the Product has been purchased by the end-user and not used for hire purposes; (III) the Product has not been misused, handled carelessly, or other than in accordance with any instructions provided with respect to its use; (IV) the Product has not been damaged due to acts of nature, such as lighting, fire, flood, or earthquake; (V) the warranty stickers have not been removed or tampered with. [. . . ] Each Corsair HX power supply is backed with an industry-leading 5-year warranty and 24/7 on-demand online customer service. Truly Independent Dual Transformers ­ Allow for optimum load balancing resulting in greater performance and compatibility. HX1000W is packed with the latest technology and features: Guaranteed to deliver 1000W at 50°C 80%+ energy efficient under real world load conditions True dual rail design for a total of 80A on +12V Multi-GPU ready 105°C solid state capacitors Active Power Factor Correction (PFC) with PF value of 0. Auto switching circuitry provide universal AC input 90-264V Over Current/Voltage/Power Protection, Under Voltage Protection and Short Circuit Protection provide maximum component safety Dimensions: 150mm(W) x 86mm(H) x 200mm(L) MTBF:100, 000 hours Corsair HX1000W Power Supply unit with 24-pin main power connector, 8-pin EPS/12V connector, and dual PCI-E 8-pin (6+2) cables. X2 SATA cables with four connectors x2 SATA cables with two connectors X2 4-pin peripheral cables with four connectors and floppy connector x2 4-pin peripheral cables with two connectors Installation Before proceeding with installation, please read through this manual in its entirety. please consult with individual component manufactures installation manuals prior to proceeding. This guide is meant to be used in conjunction with all the other installation guides for your components. Step A: Building a brand new system: (If you are replacing your existing power supply, please go to step B. Following the directions in your chassis manual install the HX1000W in your computer case with the provided screws. The main 24-pin power cable on the HX1000W has a detachable 4-pin mechanism to support either a 24-pin or a 20-pin socket on the motherboard. If your motherboard has a 24-pin socket, you may connect the 24-pin main power cable from the HX1000W directly to your motherboard. If your motherboard has a 20-pin socket, you must detach the 4-pin cable from the 24-pin connector, and then plug the 20-pin cable onto your motherboard without connecting the 4-pin connector. WARNING: The detachable 4-pin from the 24-pin main connector is not a "P4" or "+12V" connector. Serious damage can be caused if you use it in place of "P4" or "+12V" connector. The EPS12V 8-pin connector can be separated and used as a P4 or ATX 4-pin connector. If your motherboard is equipped with a P4 connector separate the EPS12V 8-pin connector and plug one of the halves into your motherboard. If your motherboard has an EPS12V 8-pin socket, connect the 8-pin cable directly to your motherboard. If your motherboard has two EPS12V sockets ensure you connect both of them. Inspect the ends of the modular cables that connect to the power supply and note that blue ended cables are for the PCI-E cables and the black ended ones are for peripheral devices such as case fans, disk drives and floppy drives. Do not connect both a SATA power connector and a 4-pin Molex connector to the same drive unless directed to do so by the drive manufacturer. [. . . ] Follow the direction in your chassis manual and uninstall your existing power supply. 60950-1 TUV EN 60950-1 CB IEC 60950-1 WARNINGS Due to high voltages inside the power supply, under no circumstances should the power supply cover be removed. Do not insert any objects into the open ventilation or fan grill area of the power supply. Please use ONLY genuine Corsair modular cables with Corsair HX1000W Series Power Supply. [. . . ]