User manual CORSAIR GAMING SERIES GS600 2013 EDITION 80PLUS BRONZE

[. . . ] 140mm Thermally Controlled Fan with LED control The ultra-quiet, dual ball-bearing fan automatically adjusts its speed according to temperature. On the GS600, you can light up the transparent fan blades in a cool, blue glow. On the GS700 and GS800, choose from cool blue, high-intensity red or icy white. [. . . ] Disconnect the AC power cord from your wall outlet or UPS and from the existing power supply. Disconnect all the power cables from your video card, motherboard and all other peripherals. Follow the directions in your chassis manual and uninstall your existing power supply. Follow the directions in your chassis manual and install the power supply with the screws provided. The main 24-pin power cable has a detachable 4-pin mechanism in order to support either a 24-pin or a 20-pin socket on the motherboard. If your motherboard has a 24-pin socket, you may connect the 24-pin main power cable from the power supply directly to your motherboard. If your motherboard has a 20-pin socket, you must detach the four-pin cable from the 24-pin connector, and then plug the 20-pin cable onto your motherboard without connecting the four-pin connector. If your motherboard has an eight-pin +12V socket, connect the eight-pin cable directly to your motherboard. If your motherboard has a four-pin socket, detach the four-pin from the eight-pin cable, and then plug this four-pin cable directly to your motherboard. WARNING: The detachable four-pin from the 24-pin main connector is not a “P4” or “+12V” connector. Serious damage can be caused if you use it in place of a “P4” or “+12V” connector. Connect the peripherals cables to your hard drive and CD-ROM/DVD-ROM power sockets. Connect the SATA cables to your SATA SSD or hard drive’s power sockets. Connect the PCI-Express cables to the power sockets of your PCI-Express video cards if required. Connect the peripheral cables to any peripherals requiring a small 4-pin connector. Connect the AC power cord to the power supply and turn it on by pushing the switch to the ON position (marked with “I”). Length 600mm ± 25mm 650mm ± 25mm 600mm ± 25mm 600mm ± 25mm 750mm ± 25mm 750mm ± 25mm Connector/Cable 1 1 1 3 3 1 ATX Cable (24-PIN) EPS12V CPU Cable (8-PIN) PCI-E Cable SATA Cable Peripheral Cable Floppy Adapter GS700 Qty 1 1 6 2 2 2 2 Length 600mm ± 25mm 650mm ± 25mm 600mm ± 25mm 700mm ± 25mm 750mm ± 25mm 750mm ± 25mm Connector/Cable 1 1 1 4 3 1 ATX Cable (24-PIN) EPS12V CPU Cable (8-PIN) PCI-E Cable SATA Cable Peripheral Cable Floppy Adapter 7 GS800 Qty 1 1 4 2 2 2 Length 600mm ± 25mm 650mm ± 25mm 600mm ± 25mm 700mm ± 25mm 850mm ± 25mm 850mm ± 25mm Connector/Cable 1 1 1 4 4 1 ATX Cable (24-PIN) EPS12V CPU Cable (8-PIN) PCI-E Cable SATA Cable Peripheral Cable Floppy Adapter Notes: • loppy connectors are attached to the end of the peripheral cable. F • he ATX power connector has a detachable four-pin mechanism in order T to support either a 24-pin or a 20-pin socket on the motherboard. [. . . ] If this power supply uses modular cables, use only manufacturer supplied cables. Other cables might not be compatible and could cause serious damage to your system and power supply. Do not force this cable in the P4 or ATX +12V socket on the motherboard. [. . . ]