User manual CONWIN RIBBON DISPENSERS

[. . . ] Ribbon Dispenser Instruction Sheet 8-Spool Ribbon Dispenser Versatile unit mounts on wall or cylinder. Special bracket is included to hang from any size cylinder. 20-Spool Ribbon Dispenser Compact free-standing unit features two ribbon cutters. [. . . ] Stretch the rubber bands over the spool arms using one rubber band for every two spools. Tips For Best Results 1. The weight of the dispenser will hold inflated balloons until needed­just tie balloons to ribbons and wait to cut the ribbons until desired. Replacement Ribbon Cutters (Conwin #35800) are available in 4-packs from your authorized Conwin Distributor. Place the ribbon dispenser at the edge of the mark and pull all ribbons simultaneously. Cut ribbons with scissors. 8-Spool Ribbon Dispenser Mounting Instructions Wall-Mounting Instructions Conwin #32120 1. Hold the dispenser against the wall trace outline of mounting holes with a pencil. Select the appropriate drill bit size based on the size of the anchor insert or the size of the wood screw. When mounting the dispenser on drywall, insert the Drywall Anchor insert into the pilot hole. Important: Leave approximately 1/4" between the head of the screw and the wall. The key hole wall mounts enable the dispenser to be easily removed from the wall to place on a cylinder or to take on a job. [. . . ] Conwin's Portfolio Builder images are the perfect solution for making winning presentations to your clients. Thirty-two photo quality images are available in the full series. Visit www. ConwinOnline. com today! [. . . ]