User manual CONTINENTAL EDISON CI3Z5060WP

[. . . ] Se trata de unos paneles de colores claros con acabado mate a los lados y/o el panel con acabado mate en la parte trasera del horno. Quite primero la lente del cristal y a continuación quite la bombilla. São painéis com acabamento mate e cor leve nas laterais e/ou painel de acabamento mate na traseira do forno. This User Manual contains important safety information and instructions on the operation and maintenance of your appliance. [. . . ] Safety switch off after Child Lock After switching on the appliance, the child lock function can be activated. To activate the child lock, simultaneously press the increase heat setting button and decrease heat setting button and then press the increase heat setting key again. "L" indicating LOCKED will appear on all heater displays and the controls can not be used. (If a cooking zone is in the hot condition, "L" and "H" will display alternately). The hob will remain in a locked condition until it is unlocked, even if the appliance has been switched off and on. Simultaneously press the increase heat setting button and decrease heat setting button and then press the decrease heat setting button again. "L" will no longer be displayed and the hob will switch off. Key Lock The key lock function is used to set `safe mode' on the appliance during operation. It will not be possible to make any adjustments by pressing the buttons (for example heat settings). The lock function is active if the key lock button is pressed for at least 2 seconds. After successful operation, the key lock indicator will flash and the heater will be locked. Buzzer While the hob is in operation, the following activities will be signalled by the buzzer. Continuous button operation over a longer period of time (10 seconds) will be accompanied with a longer, intermittent sound signal. Boost Function To use this function, select a cooking zone and set the desired cooking level, then press the "P" (Boost) button. The Boost function can only be activated if it is applicable with the cooking zone selected. If the Boost Function is active, a "P" will be shown on the corresponding display. Activating the booster can exceed the maximum power, in which case the integrated power management will be activated. The necessary power reduction is shown by the corresponding cooking zone display blinking. Blinking will be active for 3 seconds to allow for further adaptations of the settings before power reduction. If there is an error, an error code will be shown on the heater displays. Switch the hob off by pressing , wait until "H" disappears for all zones, switch the hob on by pressing and continue to use. If the same error is displayed again, call an authorised service agent. [. . . ] Do not leave vinegar, coffee, milk, salt, water, lemon or tomato juice on the stainless steel for a long time. Removal of the Oven Door Before cleaning the oven door glass, you must remove the oven door, as shown below. Open the locking catch (a) (with the aid of a screwdriver) up to the end position. 2 Maintenance WARNING: The maintenance of this appliance should be carried out by an authorised service person or qualified WARNING: Switch off the appliance and allow it to cool before cleaning your appliance. [. . . ]