User manual CONTINENTAL EDISON CE60LFHD24U

[. . . ] POWER Press the button once and the player will go into standby state. Press the button again and the player will resume operating as before. [. . . ] Press enter to choose Edit Mode, then move the LEFT button to enter song selection, press ENTER to confirm. then move the cursor to Add to Program at the right side , press ENTER to confirm. Note: If song is being played while programming, press STOP button to stop current playing before you choose program playing. To clear the program, it must be in STOP status, After choosing the sond needed to clear, move the cursor to Clear Program. Notes: To play randomly, preset repeat state as "Repeat: off" at the right side, mode state as "Shuffle on". There are 3 Repeat modes and 3 Mode states at the right side, Repeat Single is to repeat single track. You should combinethis option with "lower sampling rate", which is explained further on. Raw: If you select this option the player will play the DVD's original audio track. Use this option when you want to use the Dolby Digital AC3 signals through the optical or coaxial audio output. This listening mode is most suitable at night for softest audio output and least disturbance. HDMI Mode Display Problem: When you select an HDMI display mode which is not supported by your television (if you choose, for example, 1080i while your television supports up to 720p only), you get a black screen. as a result , you cannot change the HDMI resolution in the setup menu. [. . . ] HDMI Mode Display Problem: When you select an HDMI display mode which is not supported by your television (if you choose, for example, 1080i while your television supports up to 720p only), you get a black screen. as a result , you cannot change the HDMI resolution in the setup menu. [. . . ]