User manual CONSTRUCTA SRI3015 annexe 1

[. . . ] Before using for the first time, still read the installation and operating instructions! [. . . ] The appropriate programmes for your appliance can be found on the fascia. When the prgramme has ended (programme selector is back in the 12 o'clock position), switch off the main switch. Pull up lower arm Clean under running water (if required, use a toothpick) Fault Residual water in the appliance Possible causes Programme not yet finished Remedial action Wait until the programme finishes (programme selector is back in the 12 o'clock position) or cancel programme (see below). Rinse aid dosage too high (visible streaking) Rinse aid dosage too low Appliance does not run/stops No/insufficient water check whether Turn on the water supply. Water too hard Glasses not dishwasher-proof Detergent unsuitable Refill with salt/adjust water softening system. Utensils are not clean Utensils close together/on top of each other Insufficient detergent Unsuitable programme Spray arms blocked Filters loose Filters dirty Spray arm nozzles blocked Insufficient water Clean spray arms (see above). [. . . ] Arrange dishwasher-proof utensils (having removed any ash, wax, grease, ink, sticky labels; remove, large remnants of jam, dairy products and food) according to the operating instructions and check that the spray arms can rotate freely. [. . . ]