User manual CONSTRUCTA CWF10S10IL

[. . . ] Safety instructions ­ The washing machine is heavy - take care when lifting. Do not install the washing machine outdoors or in areas exposed to frost. ­ In addition to the instructions provided in this document, special regulations from the relevant water and electric utility companies may apply. ­ Route hoses and cables in such a way that there is no risk of tripping. Scope of delivery depending on model Aqua Stop Aqua Secure Standard Moisture inside the drum is due to final testing. Removing the transport safety devices ­ Before using the appliance for the first time, the 4 transport safety devices must be completely removed and kept safe. [. . . ] We can always find a suitable remedy, so that a technician is not called out unnecessarily. The contact details for your nearest after-sales service can be found here or in the After-sales service directory (depending on the model). Please give the after-sales service the product number (E no. ) and the production number (FD) of the appliance. This information can be found: inside the washing machine door* / on the open service flap* and on the back of the appliance. Production number *depending on model Installation instructions en *460857* Electrical connection The washing machine must only be connected to an alternating current via a properly installed earthed socket. 1009 / 9000460857 The power supply and voltage indicated on the washing machine (rating plate) must be the same. The connected load and fuse required are specified on the rating plate. Make sure that: ­ the mains plug fits the socket, ­ the cable cross-section is adequate, ­ the earthing system is properly installed. The mains cable may only be replaced by a qualified electrician (if required). If a residual current circuit breaker is used, only use a type which displays this symbol: , . Only this symbol guarantees compliance with the currently applicable regulations. Mains plug: ­ do not plug in to/pull out of the socket with damp hands. ­ when removing the plug from the socket, pull the plug body only, not the cable. Manufacturer -> Instruction manual Contents After transportation, the transport safety devices must be removed. Product number To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into compartment II and start the Empty programme. You can rely on the competence of the manufacturer. This way, you can ensure the repair is carried out by trained service technicians who are equipped with genuine spare parts. Technical specifications Dimensions (width x depth x height) Weight Mains connection 60 x 59 x 85 cm 63 - 83 kg depending on model Nominal voltage 220-240 V, 50 Hz Nominal current 10 A Nominal power 2, 300 W 100-1000 kPa (1-10 bar) Page Safety instructions . 7 Water pressure Do not operate the washing machine until you have read these instructions. Keep all the documents in a safe place for future reference, or to pass on to the next owner. 5 6 7 Safety instructions ­ The washing machine is heavy - take care when lifting. Do not install the washing machine outdoors or in areas exposed to frost. ­ In addition to the instructions provided in this document, special regulations from the relevant water and electric utility companies may apply. ­ Route hoses and cables in such a way that there is no risk of tripping. Scope of delivery depending on model Aqua Stop Aqua Secure Standard Moisture inside the drum is due to final testing. Mains cable Water inlet Water outlet Environmentally-friendly disposal ­ Dispose of packaging in an environmentally friendly manner. ­ This appliance is labelled in accordance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment - WEEE. [. . . ] Make sure that: ­ the mains plug fits the socket, ­ the cable cross-section is adequate, ­ the earthing system is properly installed. The mains cable may only be replaced by a qualified electrician (if required). If a residual current circuit breaker is used, only use a type which displays this symbol: , . Only this symbol guarantees compliance with the currently applicable regulations. [. . . ]