User manual CONSTRUCTA CP432J5

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CONSTRUCTA CP432J5. We hope that this CONSTRUCTA CP432J5 user guide will be useful to you.


CONSTRUCTA CP432J5 : Download the complete user guide (2839 Ko)

You may also download the following manuals related to this product:

   CONSTRUCTA CP432J5 (3036 ko)
   CONSTRUCTA CP432J5 (2643 ko)
   CONSTRUCTA CP432J5 (2818 ko)
   CONSTRUCTA CP432J5 (2856 ko)
   CONSTRUCTA CP432J5 (2849 ko)
   CONSTRUCTA CP432J5 (2843 ko)
   CONSTRUCTA CP432J5 (2843 ko)
   CONSTRUCTA CP432J5 (2840 ko)
   CONSTRUCTA CP432J5 annexe 1 (2843 ko)

Manual abstract: user guide CONSTRUCTA CP432J5

Detailed instructions for use are in the User's Guide.

[. . . ] en Instructions for use 9000 137 936 (8511-1) en Index 4 6 7 8 9 10 10 14 Programme overview . . en Safety instructions Delivery Immediately check the packaging and dishwasher for any damage which may have been caused in transit. Please dispose of packaging material properly: Warning For safety reasons, if the appliance is not fitted in a recess, thereby making a side wall accessible, the door hinge area should be covered at the side. (Risk of injury) Covers are available as optional accessories from customer services or specialist stores. Installation Install and connect the appliance according to the installation and assembly instructions. [. . . ] Greater deviations may be caused by: different quantities of utensils inlet temperature of the water water pressure ambient temperature mains voltage tolerances and appliance-specific tolerances (e. g. temperature, water flow rate, etc. ) The water consumption values refer to water hardness value 2. Programme sequence indicator While the dishes are being washed, the programme selector rotates in a clockwise direction and indicates how far the programme has progressed. End of programme The programme has ended when the pump noise is no longer audible and the programme selector has reached its initial position (12 o'clock position). Switching the dishwasher OFF Several minutes after the programme has ended: Set the main switch 5 to OFF. (Does not apply when Aqua­Stop unit has been fitted) It is not necessary to reset the programme selector. when they have cooled down. 17 en Interrupting the programme Set the main switch 5 to OFF. If the hot water was switched ON or the appliance has already heated up and then the appliance door opened, leave the door ajar for several minutes and then close. In order to resume the programme, set the main switch to ON again. Maintenance and care A regular inspection and maintenance of your machine will help to prevent faults. Therefore you should occasionally have a careful look inside your dishwasher. Overall condition of the machine Check spray arm for grease and limescale deposits. If you find such deposits: Fill the detergent dispenser with detergent, start the appliance without utensils in the programme which has the highest wash temperature. Clean the appliance with detergents/ appliance cleaners which are particularly suitable for use with dishwashers. Regularly wipe the front of the appliance and panel with a damp cloth; water and a little washing-up liquid will suffice. Do not use sponges with a rough surface or abrasive detergents, as these could scratch the surfaces. Health hazard! Changing the programme Switch off the main switch 5 . Set the programme selector 1 to the new programme (rotate in a clockwise direction only!). Note If the power supply is disconnected while the appliance is operating, e. g. by switching off the appliance or due to a power failure, all settings remain stored. Operation continues automatically as soon as the power supply is restored. Dishwasher salt Check the LOW SALT indicator up with salt, if required. 24 . Top Rinse-aid Check the level of liquid in the rinse-aid container 30 . Top up with rinse-aid, if required. 18 en Filters The filters 26 prevent large particles of food in the water from reaching the pump. When the appliance has finished washing, check the filters for particles of food and, if required, clean. After undoing the coarse micro-filter, the filter unit can be removed. Remove any particles of food and rinse the filters under running water. Insert the filter unit and tighten the coarse micro-filter. Spray arms Lime and remnants of food in the washing water can block the nozzles in the spray arms 22 and 23 and the arm mountings . [. . . ] Ensure that the drainage hose is not kinked, crushed or twisted (ensure that there is no sealing cover which prevents the waster water from flowing away!). 24 en Removing the appliance It is essential, when removing the appliance, to observe the following sequence: First, disconnect the appliance from the power supply. Pull out the appliance, carefully pulling the hose behind. Waste disposal Disposal Old appliances are not worthless rubbish. To prevent children from locking themselves in the appliance and suffocating, destroy the door lock and childproof lock (if fitted). Please contribute to a better environment by disposing of packaging materials in an environmentally-friendly manner. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CONSTRUCTA CP432J5




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CONSTRUCTA CP432J5 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.