User manual CONSTRUCTA CF12550
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CONSTRUCTA CF12550. We hope that this CONSTRUCTA CF12550 user guide will be useful to you.
You may also download the following manuals related to this product:
CONSTRUCTA CF12550 annexe 1 (1213 ko)
Manual abstract: user guide CONSTRUCTA CF12550
Detailed instructions for use are in the User's Guide.
[. . . ] CF12550
Instruction manual
Making cooking as much fun as eating Please read this instruction manual. This will ensure that you make use of all the technical benefits the cooker has to offer. You will then be familiarised with the individual components of your new cooker. The tables list the settings and shelf positions for numerous well known dishes. [. . . ] They cannot snap shut.
A
B
d
Detaching the door
There is a risk of injury. Ensure that the locking levers are always fully closed or, when detaching the oven door, fully open.
1. Close the door a little more and pull it out.
A
B
Attaching the door
Reattach the oven door in the reverse sequence to removal.
1. When attaching the oven door, ensure that both hinges
are inserted straight into the opening (Fig. The notch on the hinge must engage on both sides (Fig.
B).
A
B
3. If the oven door falls out accidentally or a hinge snaps shut, do not reach into the hinge. Call the after sales service.
27
Cleaning the shelf frames
The shelf frames can be removed for cleaning. Pull out the projections at the bottom from the apertures they are inserted in.
2. Then remove the complete frame by first pulling it
downward and then forward. Clean the shelf frames using washing up liquid and a sponge or a brush.
To hook rails back into position:
1. Insert the two hooks carefully into the upper holes.
28
.
Caution. Incorrect assembly: never move the rail before the two hooks are secured fully in the upper holes.
The enamel can become damaged and break.
2. Correct assembly: the two hooks must be inserted fully into the upper holes. Now move down the rail slowly and carefully and insert into the lower holes.
3. Insert both rails.
If the rails are fitted correctly, the distance between the two upper shelf positions is greater.
29
Troubleshooting
Should a malfunction occur, it is often only due to a minor fault. Please read the following instructions before calling the after-sales service: Problem The oven does not work. Power cut Comments/remedy Look in the fuse box and check that the fuse is in working order. Reset the time.
Repairs may only be carried out by fully trained after-sales service technicians. Improper repairs may constitute serious hazards to the user.
30
Replacing the oven light on the ceiling of the oven
If the oven light fails, it must be replaced. 25 watt heat resistant replacement bulbs can be obtained from the after sales service or specialist shops. Unscrew the lamp cover in the oven interior by turning it
to the left.
4. Remove the tea towel and switch the fuse back on.
Replacing the glass cover
The glass cover on the oven light must be replaced if it is damaged. [. . . ] Place a wet rubber sealing ring and lid on each jar and lock the jars using clamps. They can be influenced by the room temperature, the number of jars and the amount and temperature of the jar contents. Before you change settings or switch off the appliance, make sure that the contents of the jars are actually bubbling.
44
Setting procedure
1. Place the jars inside
the pan so that they do not come into contact with each other.
2. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CONSTRUCTA CF12550
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CONSTRUCTA CF12550 will begin.