User manual CONCORD ISOFIX BASE CAR FITTING LIST 06-2009

[. . . ] Notallsafetysystemsareexactlythesame, sowe recommend that you check your CONCORD ISOFIX BASE in the car where you are going to install it. Itisveryimportantthatyoudonotusesecond-hand products, as CONCORD can only guarantee complete safety on items used by their initial buyer. CONCORDrecommendsthatyoureplaceyour CONCORD ISOFIX BASE safety seat with a new one when it has undergone violent pressure following an accident. Tohelpyourbabygrowcorrectly, weadvisethatyoudo not over-use the safety seat on long journeys, and that you frequently lay them stretched out in a Moses basket or bed. [. . . ] Tohelpyourbabygrowcorrectly, weadvisethatyoudo not over-use the safety seat on long journeys, and that you frequently lay them stretched out in a Moses basket or bed. Makesurethatinsidethecar, luggageandanyother object likely to cause harm in an accident are correctly fastened or stored. TheCONCORDISOFIX BASEsafetyseatmustbefastened correctly with the seat belts or ISOfix base, even if it is not in use, as it could be thrown around in an accident and harm the occupants of the car. RemembernottousetheCONCORDISOFIX BASEsafety seat in cars fitted with front air-bags, unless they can be disconnected or deactivated. AnychangesoradditionstotheCONCORDISOFIX BASE without the correct authorisation from CONCORD may seriously affect the safety of the restraining system. Notfollowingtheinstructionsonhowtousethe restraining system may endanger your baby`s safety. Thissafetydevicecannotbeusedwithoutitscover, or replaced with one that is not the original, as it is an integral part of the system`s safety features. Your CONCORD ISOFIX BASE safety seat has been designed with the latest safety developments in mind and has been tested under the toughest conditions. it has the following features: Installation in cars: · Slotforpassingbeltsthroughunderthebodyoftheseat that enables it to be installed in cars with shorter seat belts. Install the seat in your car with a simple click and no need to thread seat belts through. Pass the abdominal part of the car seat belt through the front slots (01) on the side of the casing. If you install the seat with the ISOfix base option (optional) follow the instructions that you will find on the base. Put the baby in the safety seat, making sure that they are sitting back in it and that their back is straight. Your CONCORD ISOFIX BASE carrycot can be fastened to any CONCORD chassis that has the PRO-FIX system. To release your CONCORD ISOFIX BASE from the chassis, press the switch (11) on the handle and pull the seat upwards. To fasten the safety seat to a chassis, insert the connections in the cavities on the chassis and press until you hear a click. Wash the plastic parts in warm soapy water and dry all the components thoroughly. The cover can be removed for washing for which you should follow these instructions: Casing cover. Remove the cover from the tightener button area and finally undo the Velcro on the central part and remove the cover upwards. The warranty shall commence from the time at which the seat is purchased. [. . . ] Remove the cover from the tightener button area and finally undo the Velcro on the central part and remove the cover upwards. The warranty shall commence from the time at which the seat is purchased. The warranty period shall correspond to the legal warranty period for the sale of child seats applicable in the end user's country. The contents of the warranty shall comprise the remedy of a defect, the supply of a replacement, or a price reduction, at the manufacturer's discretion. [. . . ]