User manual CONCORD 4360 FAQ

[. . . ] Please reset the camera by pressing the reset button located on the back of the camera as per the illustration below. Why are some of my pictures overexposed? If you find that some of your pictures are overexposed, please try the following. [. . . ] If this film is not peeled off, images will appear blurry and foggy on the LCD. If you continue to see blurry images on the LCD, it may be that the camera was moved during picture taking or the subject was out of the defined focus range. Please hold the camera steady while taking the picture and make sure there is at least 50 cm (20 in. ) between the camera and the subject. When using the macro mode feature, the distance between the camera and the subject is from 10 cm to 50 cm (4 in. to 20 in. ). How can I get better battery performance for my digital camera?Below are some suggestion on how to prolong the battery life: · When power is in short supply, it is best to avoid the camera functions that consume the most power. Turning the zoom on and off forces the zoom lens to extend and retract with each power cycle. Have two sets of batteries, one set in the camera and one charging or in reserve for when you need to swap them out. [. . . ] The camera has a built-in power saving feature that turns the camera off after 2 minutes of inactivity (default setting) to conserve battery power. [. . . ]