User manual CONCORD 370AF

[. . . ] ENGLISH 35MM AUTO FOCUS BIG VIEWFINDER CAMERA Instruction Manual Film loading 1. Open the back cover by sliding the film door latch (11) and insert your film cartridge into the film chamber (12). [. . . ] Frame your object in the viewfinder (5) and keep a distance of at least 1. 5meters (5 feet) between the object and the camera. Before you press the shutter release button (2), hold your breath and press the button gently and firmly. After you press the shutter release button (2), the camera will advance automatically to the next frame. Flash will be automatically turned on in low lighting condition (ISO 100 below EV 11. 5). Note: When the sun or any bright light source is behind the object, it acts as a backlight and causes faces to appear dark in the pictures. To take picture with fill-in flash, hold the fill-in flash button (7) in until the flash ready indicator (9) is fully illuminated. Note: To take picture indoor where flash is prohibited, press and hold the flash off button (21). Then press the shutter release button (2) to take a picture and the flash will not go on. Specifications Type: Film format: Lens: Focusing: Focusing range: Exposure setting: Film loading: Film advance: Film rewind: Film speed setting: Exposure counter: Flash: Flash operating range: 35mm auto focus camera with built-in flash 24mm x 36mm 28mm f/5. 6 3 group 3 element lens 2 steps auto focus 1. 5m ~ (infinity) 1/100 sec. , f/5. 6 Easy loading Auto wind, stop automatically at the end of film Power film rewind with manual rewind switch DX automatic setting (ISO100/400) Mechanical additive counter Built-in sensor auto flash ISO100: 1. 5m ­ 2. 5m ISO200: 1. 5m ­ 4. 0m ISO400: 1. 5m ­ 5. 0m Approx. 5s (with fresh AA alkaline batteries) Green ­ flash ready Reverse Galilean type viewfinder Uses 2 AA alkaline batteries Shutter release button locks when lens door closed 120mm (W) X 72. 5mm (H) X 43mm (D) Approx. Slide the film rewind switch (19) right to the end in the direction of the triangular mark shown. The switch then locks in the position and the film will be rewound automatically. The rewind switch (19) will return to its original position when the back cover is opened. [. . . ] Insert two fresh AA size alkaline batteries into the battery chamber according to the + and ­ signs shown on the battery door, and close the battery door. (Fig. 1) Note: Do not use Ni-Cd batteries and to be sure replace both batteries at the same time when they are too weak to operate the cameras. FIG. 1 RUSSIAN [. . . ]