User manual CONCORD 170BV NEW

[. . . ] · Never modify the CONCORD TRANSFORMER in any way ­ this will endanger your child's safety. 25 24 · After an accident the CONCORD TRANSFORMER must be replaced or returned to the manufacturer for testing, along with a report of the accident. · You should also tell your passenger how to remove the child in the event of an accident or danger. · Do not leave your child in the child car seat unsupervised whether strapped in or not. [. . . ] · The user instructions must always accompany the child car seat. · The use of accessories and replacement parts is not permissible and shall lead, in the event of contravention, to the expiry of all claims under the warranty and of all liability claims. · Suitable for cars with three-point (lap and diagonal) seat belts tested in accordance with ECE Regulation 16 or a comparable standard. As the period of use for the CONCORD TRANSFORMER is very long, it is natural that seat covers and other used parts will each receive different degrees of wear and tear depending on the individual duration and intensity of use and will need to be replaced. For this reason it is not possible to give a blanket warranty of durability extending beyond a six-month warranty period. For additional purchases, please contact your 26 local specialist child and baby shop, specialist departments in department stores, a car accessories centre or mail order companies. There you will also be able to buy the full range of accessories for CONCORD child car seats. The buckle of the vehicle safety belt must not come above the edge of the lap belt guide. The belts may only be routed via the points of contact and the positions on the seat stated in the user instructions. If the car seat used has a front airbag, we recommend positioning the car seat as far back as possible. For cars with front and side airbags, the instructions in the car's operating manual must also be observed. It is important to ensure that the belts are always correctly positioned each time the seat is used. Belts must not be routed in any other way. _ADJUSTINGTHEINCLINATION To use the inclination adjuster on the CONCORD TRANSFORMER, press the seat inclination button (04) on the front edge of the seat. The inclination of the CONCORD TRANSFORMER is continuously adjustable and is locked into the current position when the seat inclination button (04) is released. 32 33 _CAREINSTRUCTIONS The cover can be removed for washing. Begin by removing the head section (01) followed by the seat section and the shoulder shields (02). Then pass it beneath the lap belt guides (03) and insert the fixings into the channel running along the edge of the seat. Finally, attach the cover for the head section (01) and shoulder shields (02). _GENERALINFORMATION · This is a "universal" child restraint system. It is approved for general use in vehicles in accordance with ECE Regulation 44, Amendment 04 and fits most, but not all, passenger vehicle seats. · This child restraint system from ECE groups II and III is suitable for children from 3­12 years weighing 15­36 kg. · It can be assumed that the system will fit correctly if the vehicle manufacturer states in the vehicle manual that the vehicle is suitable for the installation of a "universal" child restraint system for the relevant age group. · This child restraint system has been classified as being of the "universal" class, satisfying stricter conditions than previous models which do not bear this label. · If in doubt, please consult the manufacturer of the child restraint system or the retailer. [. . . ] · Only suitable for vehicles with three-point (lap and diagonal) seat belts tested and approved in accordance with ECE Regulation 16 or a comparable standard. 34 · When they come into contact with moisture, especially during washing, the cover fabrics may fade slightly. · Do not use solvents! 35 _GUARANTEE The guarantee begins on the day of purchase. The guarantee period corresponds to the statutory warranty period in the end-user's country concerned. At the manufacturer's discretion, the guarantee shall cover rectification, replacement or a price reduction. [. . . ]