User manual COMPUTER ASSOCIATES INOCULATE IT FOR NETWARE VERSION 4.5 GETTING STARTED GUIDE

[. . . ] TM MAN09120513E This documentation and related computer software program (hereinafter referred to as the "Documentation") is for the end user's informational purposes only and is subject to change or withdrawal by Computer Associates International, Inc. THIS DOCUMENTATION MAY NOT BE COPIED, TRANSFERRED, REPRODUCED, DISCLOSED OR DUPLICATED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF CA. THIS DOCUMENTATION IS PROPRIETARY INFORMATION OF CA AND PROTECTED BY THE COPYRIGHT LAWS OF THE UNITED STATES AND INTERNATIONAL TREATIES. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CA PROVIDES THIS DOCUMENTATION "AS IS" WITHOUT WARRANTY OF ANY KIND, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILTY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. [. . . ] Press ENTER in the Broadcast Recipients field to access the User List. Press ESC after you have deleted all of the recipients you want to delete. Deleting a broadcast recipient 6-12 InoculateIT Getting Started Guide Alerting Users When a Virus is Detected MHS MHS is the Netware Message Handling System, a collection of Netware NLMs that provide mail delivery service for Netware networks. The MHS option is used by InoculateIT to send E-mail messages to specific users when a virus is detected. NetWare MHS must be installed on your network in order to be able to send messages. This section explains the MHS fields on the Default Configuration Options screen. For site-specific details about what to enter in an MHS field, such as Server, contact your Netware administrator. The MHS fields are described below. Server Volume:Directory Enter the name of the server where MHS is installed. For example, enter SYS: not SYS:MHS. 6 Login ID Enter the user name Alert should use when logging into the MHS server. The default is <ENTER>. InoculateIT Getting Started Guide 6-13 Password Host Enter the hub name used by the MHS software to identify the server' MHS system. s When you press ENTER in the MHS Recipients field, the current list of recipients appears: The recipients list is initially empty. Recipients Adding MHS recipients 1. For NetWare 3. x users, the E-mail address must be in the MHS format: USER@HOST. The USER and (MHS) HOST can each consist of up to eight characters separated by the @ symbol. For NetWare NDS users, the E-mail address must be in the format: USER@CONTEXT. Press ESC after you have entered all of the recipients you want. 6-14 InoculateIT Getting Started Guide Alerting Users When a Virus is Detected SNMP The SNMP option is used to send alerts using an SNMP (Simple Network Management Protocol) system, such as NetWare Management System (NMS) and HP Open View. At the server console, type the following: LOAD EDIT SYS:\ETC\TRAPTARG. CFG This will open the TRAPTARG. CFG file and allow you to enter the necessary information. Under the Protocol IPX section, you may enter one or more IPX addresses. Under the Protocol UDP section, you may enter one or more IP addresses. Make sure you press the TAB key on the line before entering an address. 6 InoculateIT Getting Started Guide 6-15 If you enter the same machine under both the IPX Protocol and UDP Protocol sections, you may receive each message twice, depending on the configuration of your network, routers, etc. SNMP entries will not take effect until you down your server and restart it. Be aware that this process will stop all functions and cause all users to be logged out. 6-16 InoculateIT Getting Started Guide Alerting Users When a Virus is Detected FAX The FAX option is used to send a fax when a virus is detected. CA' FAXserve application must be installed on s the server being used to send the fax. This section explains the FAX fields on the Default Configuration Options screen. Host Login ID Enter the name of the server where FAXserve is installed. Enter the user name Alert should use when logging in to the FAXserve server. If the FAXserve server is loaded in bindery, the login ID must be in bindery format. [. . . ] While the current status is displayed on the main menu, this log contains a historical status listing. It also displays, and lets you modify, how often GETBBS should call CA' bulletin board. You can also enter UNLOAD GETBBS at the server console. InoculateIT Getting Started Guide B-3 Configuring GETBBS Most of the configuration is preset for you. Enter information on the Configuration screen. BBS User First Name, Last Name CA' BBS s Number Password Next Call is on: These fields come preset with the information needed for GETBBS to log in to CA' bulletin board. [. . . ]