User manual COMPAQ S2321 SETUP GUIDE

[. . . ] HP shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Second Edition (March 2010) Document Part Number: 603307-002 Important Safety Instructions 1. [. . . ] Please select "On" or "Off" as the factory default on-off setting, depending on the model of your monitor. The operational status of your monitor will be displayed when you power on your monitor. To select the positions where the status information is displayed: Top Monitor status Middle Bottom Off The factory default setting is "Top" or "Off", depending on the model of your monitor. Controlling some OSD menu functions, such as brightness, contrast and color DDC/CI temperature, on your computer is allowed. Power indicator on the front panel Power on/off the indicator (LED) on the power button. If the indicator is set as "Off", it will be off all the time. The following timer adjustment menu options are available: Set the current time ­ to set the current time in hours and minutes. Set the sleep time ­ to set the desired time when your monitor works under the sleeping mode. Sleep timer Set the opening time ­ to set the desired time when your monitor is awakened from the sleeping mode. Timer - Set "On' or "Off" status for the Sleep Timer. Sleep at once ­ to activate the sleep mode for your monitor 10 Default video input When the monitor is connected to two active and valid video sources, select one of them as the default video input. Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the power cord does not exceed the rating of the power cord. Look on the power label to determine the ampere rating (Amps or A) for each device. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Do not walk on the cord. 21 Maintenance Guidelines To enhance the performance and extend the life of the monitor: Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/ back plate of the monitor. Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. You can substantially increase the life expectancy of the monitor by using a screen saver program and turning off the monitor when not in use. [. . . ] For more information about where you can drop off your waste equipment for recycling, please contact the local city office, the household waste disposal service or the shop where you purchased the product. Chemical Substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and Council). A chemical information report for this product can be found at http://www. hp. com/go/reach. 26 HP Recycling Program HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, go to http://www. hp. com/ recycle. Restriction of Hazardous Substances (RoHS) A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www. hp. com/go/jisc0950. 11363-2006 11363-2006 27 Turkey EEE Regulation In Conformity with the EEE Regulation EEE Yönetmeliine Uygundur 28 C Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions: Problem Power LED is not on. [. . . ]