User manual COMPAQ MP1800

[. . . ] Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice and is provided "as is" without warranty of any kind. [. . . ] Analog, Use PIP for Picture in Picture or Use Source to Change Input--Indicates analog plus video and DVI are present. Press the PIP button on the remote control for picture in picture or change the setting by pressing the Source button. Composite Video, Use Source to Change Input--Indicates composite video or other inputs are present. S-video, Use Source to Change Input--Indicates S-video with other inputs are active. Press the Source button to change the setting. I I I I Using the Projector 2-9 Chapter 3 Using the Compaq Multimedia Adapter The Compaq Multimedia Adapter is specifically designed to fit the Compaq MP1800 Microportable Projector. This adapter enables signals from camcorders, DVD players, or videocassette recorders to be shown through the projector. To connect the projector to a camcorder, DVD player, or videocassette recorder, you need to connect the Compaq Multimedia Adapter to the projector. Identifying the Multimedia Adapter Components Item 1 2 3 4 Component Infrared Receiver Speaker Volume +/- S-Video port Function Interprets signals received from the remote control Provides audio performance Increases/decreases volume Connects camcorders or DVD players Continued 3-1 Using the Compaq Multimedia Adapter Multimedia Adapter components (continued) Item 5 6 7 8 9 : ; Component 8-pin connector DVI port Source button Video LED Computer LED Video/RCA port Audi-in jack < Install buttons Function Connects back to the computer allowing remote mouse functionality Connects digital equipment Selects between all sources When lit, indicates video input When lit, indicates computer input Connects video equipment Connects audio equipment, videocassette recorders and DVD players, allowing sound to be played. Use to install adapter on projector 3-2 Using the Compaq Multimedia Adapter Attaching the Multimedia Adapter to the MP1800 Microportable Projector 1. Insert the hooks on top of the Multimedia Adapter into the upper slots on the projector by inserting and pushing upward, then insert the adapter plug into the digital connector on the back of the projector. Release the buttons on the sides of the Multimedia Adapter to complete the connection. When the adapter is activated, one of the LEDs 4 on the Multimedia Adapter turns green. Using the Compaq Multimedia Adapter 3-3 Connecting a Camcorder, Videocassette Recorder, or DVD Player to the Compaq Multimedia Adapter A rubber boot cover protects the DFP (digital) connector on the projector. Be sure to remove the cover before connecting the Multimedia Adapter to the projector and replace the cover when the projector is not in use to prevent electrostatic discharges from damaging the connector. 1. Use an RCA cable to connect a videocassette recorder to the video connector on the Multimedia Adapter. To play audio through the Multimedia Adapter, connect an audio cable to the source audio-out jack and the audio-in jack on the Multimedia Adapter . Use an S-video cable to connect a camcorder or DVD player to the S-video connector on the Multimedia Adapter. Connect one end of the power cord into the back of the projector and the other end to an electrical outlet that is easily accessible and close to the projector. Press the Source button on the Multimedia Adapter to select different input sources. 3-4 Using the Compaq Multimedia Adapter The Compaq Multimedia Adapter can remain attached to the projector, or it can be removed and stored in the carrying case. Using the Compaq Multimedia Adapter 3-5 Connecting a Video Player If your video player uses a round, one-prong composite video connector, use the RCA video cable. If your video player uses a round, four-prong S-video connector, use the S-video cable. Plug the RCA video cable into the video-out port on the video player and the video port on the video adapter. If you are using the S-video cable, connect it to the S-video out connector on the video player and the S-video port on the video adapter. Press the Source button on the back of the Multimedia Adapter to switch the projector signal from data (computer icon) to video (TV icon). The data mode receives computer inputs and the video mode receives video input such as a TV tuner, videocassette recorder, or camera. With the Compaq Multimedia Adapter attached, the projector is compatible with major video standards such as NTSC, PAL, and SECAM. [. . . ] Consult the dealer or an experienced radio or television technician for help. I I Modifications The FCC requires the user to be notified that if any changes or modifications are made to this device, not expressly approved by Compaq Computer Corporation, this may void the user's authority to operate the equipment. Agency Regulatory Notices B-1 Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. Declaration of Conformity for Products Marked with the FCC Logo--United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product, contact: Compaq Computer Corporation P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-652-6672 (1-800-OK COMPAQ) For questions regarding this FCC declaration, contact: Compaq Computer Corporation P. O. [. . . ]