User manual COMPAQ MP1400

[. . . ] Microsoft, Windows, and Windows NT are registered trademarks and Visual C++ is a trademark of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. No part of this guide may be photocopied or reproduced in any form without prior written consent from Compaq Computer Corporation. [. . . ] Push in the two buttons 1 on the bottom sides of the optional Multimedia Adapter. Insert the hooks on top of the optional Multimedia Adapter into the upper slots 2 on the projector by inserting and pushing upward, then insert the adapter plug into the digital connector 3 on the back of the projector. Release the buttons on the sides of the optional Multimedia Adapter to complete the connection. When the adapter is activated, one of the LEDs 4 on the Multimedia Adapter turns green. MP1400 Microportable Projector 3-3 Connecting a Camcorder, VCR, or DVD Player to the Optional Multimedia Adapter A rubber boot cover protects the DFP (digital) connector on the projector. Be sure to remove the cover before connecting the Multimedia Adapter to the projector and replace the cover when the projector is not in use to prevent electrostatic discharges from damaging the connector. Use an RCA cable to connect a VCR to the video connector 1 on the optional Multimedia Adapter. Use an S-video cable to connect a camcorder or DVD player to the S-video connector 2 on the optional Multimedia Adapter. Connect one end of the power cord 3 into the back of the projector and the other end to an electrical outlet that is easily accessible and close to the projector. To connect the multimedia adapter speaker for sound, connect the RCA audio cable 4 to the audioin port on the optional Multimedia Adapter and the audio-out port on the VCR, camcorder, or DVD player. If you are not using the speaker at this time, skip to the next step. 3-4 MP1400 Microportable Projector 4. Press the Source button 5 on the Multimedia Adapter to toggle and select between the connected input sources. The optional Compaq Multimedia Adapter can remain attached to the projector, or it can be removed and stored in the carrying case. MP1400 Microportable Projector 3-5 Connecting a Video Player a round, one-prong composite video If your video player usesvideo cable. If your video player uses connector, use the RCA a round, four-prong S-video connector, use the S-video cable. Plug the RCA video cable into the video-out port on the video player and the video port on the video adapter. If you are using the S-video cable, connect it to the S-video out connector on the video player and the S-video port on the video adapter. Push the Source button on the back of the multimedia adapter to toggle and switch the projector signal from data (computer icon) to video (TV icon). The data mode receives computer inputs, and the video mode receives video input such as a TV tuner, VCR, video, or camera. With the optional Compaq Multimedia Adapter attached, the projector is compatible with major video standards such as NTSC, PAL, and SECAM. Use the on-screen menu to adjust the video performance manually, or press the Resync button on the projector panel to optimize it automatically. Video On-Screen Menu Adjustments When the optional Multimedia Adapter is attached to the projector and the video source is selected, an alternate video on-screen menu can be displayed on the projected screen. This menu includes some selections that are relevant to the multimedia functions of the video adapter. Attach the optional Compaq Multimedia Adapter to the projector. 3-6 2. Attach a video source to the projector. MP1400 Microportable Projector 3. Set the Source button on the optional multimedia adapter or optional remote control to video. [. . . ] Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product, contact: Compaq Computer Corporation P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-652-6672 (1-800-OK COMPAQ) For questions regarding this FCC declaration, contact: Compaq Computer Corporation P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. B-2 Agency Regulatory Notices European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. [. . . ]