User manual COMPAQ LASERJET PRO M1530 INSTALLATION

[. . . ] Select a sturdy, well-ventilated, dust-free area, away from direct sunlight to position the product. Connect the power cord between the product and a grounded AC outlet, and turn on the product. [. . . ] Insert the product CD into the computer, and follow the onscreen instructions. If the software installation program does not start automatically, browse the CD contents and run the HP LaserJet Pro M1530 MFP Series. Press the Setup button, use the arrow buttons to select Fax Setup, and then press the OK button. Use the arrow buttons to select Basic Setup, and then select either Time/Date or Fax Header to change the appropriate settings. Load the configuration report face-up in the document feeder, adjust the media guides against the edges of the paper, and then press Start Copy . Load the configuration report face-down on the scanner glass, and then press Start Copy . If you did not register the product during software installation, go to www. The HP Help and Learn Center and other documentation are on the CD that came with the product or in the HP program folder on your computer. The HP Help and Learn Center is a product help tool that provides easy access to product information, HP product Web support, troubleshooting guidance, and regulatory and safety information. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules. Hewlett-Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information. [. . . ]