User manual COMPAQ 9500 REFERENCE GUIDE 02-2002

[. . . ] b Reference Guide Compaq Color Monitors Series 5500, 7500, 7550, 9500 Document Part Number: 266189-001 January 2002 © 2002 Compaq Computer Corporation. Compaq and the Compaq logo are trademarks of Compaq Information Technologies Group, L. P. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. [. . . ] This control demagnetizes the screen to reduce color impurities. 5500 9500 Parallelogram Tilt (Rotation) Moire Degauss Compaq suggests you not degauss more than once within a 30-minute period of time. Color Temp Right-Adjustment selects the color temperature to the right and Left-Adjustment selects the color temperature to the left. This control resets the monitor to factory default values. Reset Exit This control exits the OSD menu. 4­4 Reference Guide Operation Monitor Messages No Signal Message If a No Signal message displays on your monitor, check to be sure your video cable is properly connected and ensure that your computer is powered on. Out of Frequency Range Message If an Out of Frequency Range message displays on your monitor, your video resolution and/or refresh rate are set higher than the levels your monitor supports. To change the video resolution or refresh rate on your monitor, follow these steps: 1. Refer to your computer's operating system Help for instructions on entering Safe Mode. Reference Guide 4­5 Operation 3. Change your display settings to a supported setting (see "Technical Specifications"). Restart your computer so that the new settings take effect. Using the Energy Saver Mode Your monitor is designed to meet strict Environmental Protection Agency (EPA) Energy Star requirements for reduced power consumption. Using a combination of hardware and software functions, this energy-saving feature allows your computer to control your monitor's power consumption and reduce your monitor's power state when not in use. Power Management Status for 5500/15" Series Monitors (CV, MV, S) State On Sleep LED Color Green Amber Power Consumption < 80 watts < 5 watts Description Normal Operation Monitor screen is blank. There is a brief warm-up period before returning to full power mode. Power Management Status for 7500 and 7550/17" Series Monitors (CV, MV, S, FS, V) State On Sleep LED Color Green Amber Power Consumption < 100 watts < 5 watts Description Normal Operation Monitor screen is blank. There is a brief warm-up period before returning to full power mode. Power Management Status for 9500/19" Series Monitors (MV, S) State On Sleep LED Color Green Amber Power Consumption < 130 watts < 5 watts Description Normal Operation Monitor screen is blank. There is a brief warm-up period before returning to full power mode. 4­6 Reference Guide Operation Your monitor's energy saver feature works only when your monitor is connected to a computer that also has energy saver features. The Energy Saver utility, with its energy saving features, is available with all Microsoft Windows operating systems. Refer to your computer's user guide for instructions on setting energy saver features (also referred to as power management features). Reference Guide 4­7 A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Screen is blank. Compaq suggests you not degauss more than once within a 30-minute period of time. Position to adjust as needed. Color is abnormal. A magnetic object may be nearby. Monitor may have been moved or inadvertently bumped. Vertical height may need adjustment. Image is not centered. Horizontal position may need adjustment. Reference Guide A­1 Problem Possible Cause Vertical position may need adjustment. Solution Press the SELECT button to access the On-Screen Display. Change your settings to a supported setting (see "Technical Specifications"). Check all speaker power connections and make sure they are properly connected. Turn the power button clockwise on the front of the right-side speaker. Make sure your audio input jack (green connector) is plugged into the back of your computer. Increase volume by using keyboard volume control or clicking on the Speaker icon on your computer screen and increasing the volume level. Volume may also be adjusted on the speaker. "No Signal" is displayed on screen. Monitor video cable is disconnected. "Out of Frequency" is displayed on screen. Video resolution and/or refresh rate are set higher than what your monitor supports. No speaker power. Speaker power cord is disconnected. [. . . ] This product meets the requirements for the TCO'99 scheme which provides for international and environmental labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and magnetic fields, energy consumption and electrical and fire safety. The environmental demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. [. . . ]