User manual COMPAQ 510 REFERENCE GUIDE

[. . . ] hp digital copier series 510/610 reference guide © Copyright Hewlett-Packard Company 2002 All rights are reserved. No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. The HP Digital Copier Series includes printer driver technology licensed from Palomar Software, Inc. www. palomar. com Publication number: C7296-90280 First edition: January 2002 Printed in U. S. A. , Mexico, Germany, Singapore, or China Windows®, Windows NT®, Windows ME®, Windows XP®, and Windows 2000® are U. S. -registered trademarks of Microsoft Corporation. [. . . ] Any damage resulting from the use of a non-HP ink cartridge is not the responsibility of Hewlett-Packard. refilled ink cartridges To install a refilled HP ink cartridge, you must override the Ink Level Gauge. For more information, see override the ink level gauge on page 48. perform color calibration The Color Calibration option prints out a report that lets you manually improve your color printing or copying. You should perform this procedure only if you see problems with color tints, such as noticeably incorrect flesh tones. 1 2 Press Menu. This selects the Status and Maintenance menu, then selects the Perform Color Calibration option. A Color Calibration report is printed. maintain your digital copier 47 hp digital copier series 3 4 Follow the instructions on the report to determine the correct Color Patch Number. At the prompt on the front-panel display, enter the Color Patch Number, then press Enter. to cancel a color calibration 1 Press Menu. 2 Press 3, then press 5. This selects the Status and Maintenance menu, then selects the Restore Factory Defaults option. override the ink level gauge Overriding the Ink Level Gauge disables the printer's ink level tracking feature, but allows you to use a refilled cartridge. If you use the override sequence described below, you will disable the Ink Level Gauge for your ink cartridge. If you choose to continue copying with an ink cartridge that has had its Ink Level Gauge disabled, you will not know when the cartridge is running low or empty. Copying with an empty cartridge will seriously damage your printheads. Damage that results from continued use of an ink cartridge with a disabled Ink Level Gauge is not the responsibility of Hewlett-Packard. Damage that results from the use of non-HP ink is not the responsibility of Hewlett-Packard. The Ink Level Gauge is automatically reset when a different ink cartridge is installed in the copier. Overriding the Ink Level Gauge does not affect ink cartridge expiration dates. Follow these steps to override the Ink Level Gauge: to override the ink level gauge for the black ink cartridge and at the same time, then release. When the prompt appears asking if you want to override the ink level gauge, press 1 for Yes, or 2 for No. 1 2 3 to override the ink level gauge for the tri-color ink cartridge Press and at the same time, then release. When the prompt appears asking if you want to override the ink level gauge, press 1 for Yes, or 2 for No. Always install an ink cartridge before performing an Ink Level Gauge override. 48 maintain your hp digital copier hp digital copier series set the country/region or language Usually, the language and country/region are set when you install the HP Digital Copier. If you accidentally choose the wrong language and are unable to read the front-panel display, simply repeat the first three steps to choose the correct language. You may also consider printing a Self-Test report to identify the country/ region and language that have been selected. 1 2 Press Menu. This selects the Status and Maintenance menu, then selects the Set Country/Region and Language option. To select the language, you can do the following: ­ Press until the desired language appears. [. . . ] (3. 4 mm) bottom (trailing edge)* left right * This margin is not LaserJet-compatible, however, the total writing area is compatible. The writing area is offset from center by . 21 inches (5. 4 mm), which causes asymmetric top and bottom margins. paper weight and paper tray capacities type main paper tray Plain paper Labels Transparencies/Photo media 16 to 24 lb. (60 to 90 gsm) N/A N/A 150 sheets 30 sheets 30 sheets 30 sheets 50 black, 20 color paper weight input tray* output tray automatic document feeder (ADF) Paper Transparencies, Photo media, and Photos 16 to 24 lb. (60 to 90 gsm) 50 sheets Not Supported 50 sheets two-sided printing accessory (available as an optional accessory on some models) Plain paper 16 to 24 lb. [. . . ]