User manual COMPAQ 49G

[. . . ] 8 Finding the Network Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Managing HP Projectors Configuring the Module and Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Using a Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Using Web Jetadmin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For a list of compatible projectors, go to www. hp. com/support and look up your Jetdirect model number. 4 2 Installing the HP Jetdirect Module What's in the Box? Before setting up the module and projector, make sure your shipping box includes the following items. If any of these items were not in the box, contact HP -- see the support guide on the Documentation CD. server module power module USB cable mounting strips (two) documentation CD Quick Setup Guide 5 Setting Up the Module Connecting the Module 1. The LAN cable must be connected to a 10Base-T or 100Base-TX Ethernet local area network. 3. The wide connector plugs into the module, and the narrow connector plugs into the projector. Note Do not connect the USB cable to any USB hub, converter, or extender. Installing the HP Jetdirect Module 6 4. Plug the power cable from the power module into the server module, then plug the power module into a power outlet. 5. Check the indicator lights on the server module: The power/status light (2) on top of the server module should light solid green within 15 seconds to show proper startup. One of the LAN connector lights (3) should turn on to show the network connection speed. The USB/projector light (1) on top of the server module should light solid green to show a good USB connection. If any of these does not occur, see "Indicator Lights" on page 14. Installing the HP Jetdirect Module 7 Mounting the Module (Optional) You can mount the server module on the projector or on any nearby smooth, clean surface. The attachment strips separate to allow you to remove the module temporarily. Decide where to mount the server module on the projector or other surface: Make sure the mounting surface is flat, smooth, and clean. Make sure the cables from the module do not interfere with controls or access panels on the projector. 2. Web Jetadmin supports the management of Jetdirect-compatible HP projectors. Support for projectors requires HP Web Jetadmin version 7. 8 or greater, along with the HP Web Jetadmin application plug-in for digital projectors. We recommend using the latest version, which may provide enhanced functionality. Web Jetadmin provides access to all the functions of the embedded Web server -- and it supports many operations on groups of projectors. For complete information, go to www. hp. com/go/webjetadmin. Managing HP Projectors 12 4 Fixing Problems Troubleshooting If you have trouble with your server module or network connection, check the information in this chapter. Note If you have trouble with projector operation, see the projector user manual. 1. Make sure the projector is connected to power and is operating properly. Make sure the server module is connected to power, to a local-area network (LAN), and to the projector. Check the indicator lights on top of the server module: If the power/status light is flickering irregularly and the USB/projector light is solid green, the setup is good. On the projector, open the on-screen menu, go to the Help menu, and check the IP address shown on the screen. The address consists of four numbers separated by dots, such as 10. 2. 3. 4. If the IP address is shown, the connection between the module and projector is good. [. . . ] Operating Temperature: 0 to 55 °C (32 to 131 °F) Relative humidity: 15 to 95% at 40 °C (104 °F) Altitude: up to 4, 600 m (15, 000 ft) Storage Temperature: ­40 to 70 °C (­40 to 158 °F) Relative humidity: 15 to 90% at 65 °C (149 °F) Altitude: up to 4, 600 m (15, 000 ft) 17 Regulatory Information This section presents information that shows how the network projector manager complies with regulations in certain regions. Any modifications to the device not expressly approved by HP could void the authority to operate the device in these regions. U. S. A. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference when the device is operated in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio communications. [. . . ]