User manual COMPAQ 3050 ALL-IN-ONE J610A INSTALLATION

[. . . ] You need to know your wireless network name (SSID) and Wireless Password (WPA passphrase or WEP key) if you are using either of these wireless security methods. Note: When finished, you have both a USB and network printer icon in the printer's folder. On the desktop, open the CD and then double-click HP Installer and follow the on-screen instructions. You can share the HP Deskjet with other computers which are also connected to your home network. [. . . ] Make sure the printer is set as your default printing device: · Make sure that your printer has a check mark in the circle next to it. If your printer is not selected as the default printer, right-click the printer icon and choose Set as Default Printer from the menu. If your printer is connected directly to your computer with a USB cable and you are still unable to print, or the Windows software installation fails: 1. Remove the CD from the computer's CD/DVD drive, and then disconnect the USB cable from the computer. Windows 7 is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. If your printer is connected to your computer with a USB cable, make sure the cable connections are secure. If you are still unable to print, uninstall and reinstall the software: Note: The uninstaller removes all of the HP software components that are specific to the device. The uninstaller does not remove components that are shared by other products or programs. Follow the on-screen and the printed setup instructions that came with the HP product. The product cannot be found during software installation If the HP software is unable to find your product on the network during software installation, try the following troubleshooting steps. If the printer has been idle, you may need to press the wireless button twice to display the wireless menu. If the printer is connected, you will see the IP address (for example, 192. If the printer in not connected, you will see Not Connected on the printer display. 2: If you determined in Step 1 that the product is not connected to a network and this is the first time you are installing the product, you will need to follow the on-screen instructions during software installation to connect the product to the network. Then when prompted, temporarily connect a USB cable between your network connected computer and printer to establish a connection. If the connection fails, follow the prompts to correct the problem, and then try again. When the setup is finished, you will be prompted to disconnect the USB cable and test the wireless network connection. Once the product connects successfully to the network, install the software on each computer that will use the product over the network. If the device is unable to join your network, check for these common issues: ⷠYou might have picked the wrong network or typed in your network name (SSID) incorrectly. Check and make sure that you enter the same SSID as the computer is using. ⷠYou might have typed in your wireless password (WPA passphrase or WEP key) incorrectly (if you are using encryption). Note: If the network name or the wireless password are not found automatically during installation, and if you don't know them, you can download an application from www. [. . . ] Many security software vendors provide updates which correct known issues. - If your firewall has a setting to not show alert messages, you should disable it. When installing the HP software and using the HP printer, you may see alert messages from your firewall software. Also, if ther alert has a remember this action or create a rule for this selection, make sure and select it. [. . . ]