User manual COMPAQ 2310

[. . . ] 1910, 2010, 2210, 2310, 2510, and 2710 LCD Monitors User Guide © 2010 Hewlett-Packard Development Company, L. P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] If your monitor is using a VGA input, this procedure can correct the following image-quality conditions: Fuzzy or unclear focus Ghosting, streaking, or shadowing effects Faint vertical bars Thin, horizontal scrolling lines Off-center picture CAUTION: Burn-in image damage may occur on monitors that display the same static image onscreen for a prolonged period of time (12 consecutive hours of non-use). To avoid burn-in image damage on your monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. You can also press the Menu button, and then select Image Control, followed by Auto Adjustment from the OSD menu. If the result is not satisfactory, continue with the procedure. Insert the CD in your computer CD drive. Figure 4-1 Auto adjustment setup test pattern 7. Press the Auto/OK button on the monitor panel to produce a stable, centered image. 18 Chapter 4 Operating the Monitor Front-Panel Controls Control buttons are located on the right front of the monitor: No. 1 Icon Power Description Turns the monitor on or puts it in standby or sleep mode. The Power button is located on the top or front of the monitor depending on the model. Adjusts the volume level. 2 3 Menu 4 5 6 7 8 Source Chooses video input source from the computer Navigates backward through the OSD menu and decreases adjustment levels. Navigates forward through the OSD menu and increases adjustment levels. Auto OK Auto-adjusts the display to the ideal setting when the OSD is not active / Enters the selected option. Enters the selected option Front-Panel Controls 19 Using the On-Screen Display (OSD) An on-screen display is an image superimposed on a screen picture, commonly used by monitors, televisions, VCRs, and DVD players to display information such as volume, channel, and time. If the monitor is not already on, press the Power button to turn on the monitor. To navigate through the Main or sub-menu, press the + (Plus) button on the monitor's side panel to scroll up, or the ­ (Minus) button to scroll in reverse. NOTE: The menu moves to the top if you scroll down at the bottom of the selections. The menu moves to the bottom if you scroll up at the top of the selections. If you don't want to save the setting, select Cancel from the sub-menu or Exit from the Main Menu. NOTE: When a menu is displayed, if the buttons are untouched for 30 seconds (factory default), adjustments and settings are saved and the menu closes. OSD Menu Selections The following table lists the on-screen display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to: Icon Cancel -- to return to the previous menu level. Save and Return -- to save all changes and return to the OSD Main Menu screen. Reset -- to change back to the previous setting. Main Menu Options Brightness Contrast Color Sub-menu Options Description Adjusts the brightness level of the screen. The factory default is 6500 K or Custom Color, depending on the model. Sets your screen colors to adapt to the color standards used in the image technology industry. 20 Chapter 4 Operating the Monitor Icon Main Menu Options Sub-menu Options Quick View Description Settings saved when user adjusts the Brightness, Contrast, or Color in one of the Quick View options. [. . . ] Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaration, contact: Hewlett Packard Company P. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. European Union Regulatory Notice This product complies with the following EU Directives: Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family. This compliance is indicated by the following conformity marking placed on the product: This marking is valid for non-Telecom products and EU harmonized Telecom products (e. g. Bluetooth) This marking is valid for EU nonharmonized Telecom products. [. . . ]