User manual COMPAQ 160

[. . . ] User's Guide HP Color Copier ©Copyright Hewlett-Packard Company 1999 All rights are reserved. No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Publication number: C6690-90101 First edition: January 1999 Printed in U. S. A. , Germany, or Singapore Notice Note: Regulatory information can be found in Chapter 8. It is not lawful in many places to make copies of the following items. When in doubt, check with a legal representative first. x The information contained in this document is subject to change without notice and should not be construed as a commitment by the Hewlett-Packard Company. Hewlett-Packard assumes no responsibility for any errors that may appear in this document, nor does it make expressed or implied warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. [. . . ] x Mirror 100% (­ +) reverses the image of your original and makes a copy based on the percent reduction/enlargement percentage that you specify. You can use Mirror to copy favorite photos or images onto HP Iron-On T-Shirt Transfers, and then iron the transfer sheets to make custom t-shirts, banners, and flags. You can also use Mirror to copy presentation materials onto HP Premium Inkjet Transparency film. Then, when you flip each film over to make your presentation, you can write on it and erase, without worrying about smearing the ink. NOTE When you select Iron-On as the paper type on the front panel, the HP Color Copier automatically selects Mirror as the Reduce/Enlarge setting. Paper Type The Paper Type button affects how the HP Color Copier makes copies. You must select the appropriate setting for the kind of paper you are using. For more information about selecting the proper paper type, see Chapter 3, "All About Paper, " earlier in this guide. To change the paper type, do the following: 1 Press Paper Type repeatedly to scroll through the list of paper types. 2 When the paper type you are using appears on the front-panel display, press Select/Resume. HP Color Copier User's Guide 4-5 Lighter/Darker Use Lighter/Darker to adjust the lightness and darkness of the copies you make. Press the minus (­) or plus (+) button to make the copy lighter or darker. The circle moves to the left or right, depending on the button you press. Press Select/Resume to confirm your selection. Color Intensity Use Color Intensity to make colors on your copy more vivid or more subtle. The range of color intensity values appears as a circle on a scale on the front-panel display. 2 Press the minus (­) or plus (+) button to make the colors more subtle or intense. The circle moves to the left or right, depending on the button you press. Press Select/Resume to confirm your selection. 3 Menu With the Menu button, you can change some additional copy settings. You can also change some default settings of the HP Color Copier that are not related to copying. To change settings using the menu commands, do the following: 1 2 Press Menu repeatedly to scroll through the list of available commands. After the command you want to change appears on the display, press either minus (­), plus (+) or Select/Resume to choose it. For more information about changing specific menu commands, see "Changing Copy Settings Using the Menu Commands" and "Changing Default Settings" later in this chapter. 4-6 Copying Changing Copy Settings Using the Menu Commands Photo Mode Photo Mode temporarily turns the Text Enhancement (TE) setting off and the Enhance Light Colors (ELC) setting on for optimal copying of a photograph. For more information about using the TE and ELC settings, see "TE (Text Enhancement)" and "ELC (Enhance Light Colors)" later in this chapter. To use the Photo Mode, do the following: 1 2 Press Menu until Photo Mode (­+) r appears. The small circle to the right of the (­ +) is filled in q to indicate that Photo Mode is enabled; it is cleared r when Photo Mode is turned off. Press Select/Resume to confirm your selection. 3 Copy Paper Size Copy Paper Size lets you copy on either letter-sized (8. 5-by-11-inches) or A4-sized (210-by-297-mm) paper. To change the copy paper size, do the following: 1 2 3 4 WARNING Press Menu until Copy Paper Size appears. [. . . ] 210 x 297 mm 8-2 Technical Information Automatic Document Feeder Weight U. S. 16 - 24 lbs. Quantity 30 30 * Supports plain paper and most HP special papers. Does not support photo papers, transparencies, envelopes or labels. Power Specifications x x x ­ 240 VAC* Input Frequency: 50 ­ 60 Hz Current: 1A maximum Source (Input) Voltage: 100 Environmental Specifications x x x x Operating Temperature Ranges: 0º ­ 45º C (32º ­ 113ºF) Recommended Operating Temperature Ranges: 5º ­ 40º C (41º ­ 104º F) Humidity: 15% ­ 80% RH non-condensing Non-operating (Storage) Temperature Ranges: 40º ­ 70º C (104º ­ 158º F) * Figures are based on using the AC adapter that came with your HP Color Copier (HP part number 0950-2880). Physical Specifications x x x x Height: Width: Depth: Weight: Base: 12. 63 in. (43. 8 cm) Base: 26. 2 lb (11. 89 kg); Base/ADF: 31. 71 lb (14. 40 kg); Base/Fax: 33. 1 lb (15. 03 kg) Ordering Accessories and Supplies In the U. S. , you may order printer supplies by calling HP Direct (800) 538-8787 for the name of your local authorized HP dealer. [. . . ]