User manual COMPAQ 120

[. . . ] hp photosmart 120 series digital camera user's manual Trademark and copyright information © Copyright 2002 Hewlett-Packard Company All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. The information contained in this document is subject to change without notice. Hewlett-Packard shall not be liable for errors contained herein or for consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] Move through the Setup menu by using the buttons, and then press OK to make your selection. Date & Time For information about setting the date and time, refer to Chapter 1, Getting Started. When replacing the batteries in the camera, you may need to reset the date and time. USB Configuration setting This setting determines how the camera appears when connected to a computer. Digital Camera - causes the computer to recognize the camera as a digital camera (Picture Transfer Protocol (PTP) standard). Disk Drive - causes the computer to recognize the camera as a disk drive (Mass Storage Device Class (MSDC) standard). 32 hp photosmart 120 user's manual NOTE If you are connecting to a computer running Windows, you can use either setting. If you are connecting to a Macintosh computer, you must change this setting to Disk Drive. For more information, refer to Chapter 1, Getting Started. Move to CF Card This menu option allows you to move images from the camera's internal memory to a CF memory card. This option appears only if you have a CF memory card installed, and internal memory contains at least one image. If you select this option and then select Yes to move images, a progress bar is visible on the Display showing the progress of the move. The images previously stored in internal memory are deleted after they are moved to the CF memory card. NOTE If you have images stored in internal memory and you insert a CF memory card, you must move the images to the CF memory card to view them. 3-Reviewing Your Images 33 If your CF memory card is running out of space, you can move only the maximum number of images possible from the camera's internal memory. Language menu This menu option determines the language of the menus and the text on the Display. For information about how to select a language for your camera, refer to Chapter 1, Getting Started. Exit This menu option exits the Playback menu and returns to Playback mode. 34 hp photosmart 120 user's manual 4 Connecting and Printing You can share your pictures with family and friends by printing them, or storing them on your computer to send by e-mail. To transfer images to your computer, connect the camera to the computer by using the USB cable provided. Connecting to a computer Turn the camera on, and then connect the camera directly to a computer by using the USB cable as shown in the illustration. When the camera is connected to your computer, only the button operates. The other camera buttons do not respond. 4-Connecting and Printing 35 When the camera is connected to your computer, the viewfinder light will be blinking red, and the Display is blank. NOTE If you are using a Macintosh computer, you must change the USB Configuration setting to Disk Drive. For more information, refer to Chapter 1, Getting Started. To conserve battery power, use an optional HP AC adapter when unloading images to your computer. Now that your images are stored on your computer, you can print them, send them by e-mail, and organize them with ease. Printing your images As mentioned in Chapter 3, you can print images by using the option from the Playback menu. When you select images for printing, you create a print order, which then creates a Digital Print Order Format (DPOF) file. By using a print order, you can select one image, several images, or all of the images that you have stored in the camera. When you transfer images from the camera to your computer, the print order is copied along with them. The HP Photo Imaging software reads the print order and prints the images that you selected. For more information, refer to the software's Help. 36 hp photosmart 120 user's manual To create a print order 1 2 3 4 Press the button to activate Playback mode. 5 Press OK again to add the image to the print order. Printing with a CF memory card If your images are stored on a CF memory card, you can insert the memory card directly into most HP photosmart printers. When you insert the memory card into the printer, the printer reads the print order and prints the specified images. For more information, see the instructions available with your printer's documentation. [. . . ] Both of these warranty upgrades offer maximized uptime and productivity, the convenience of doorto-door pickup with delivery, packaging and freight prepaid by HP. For more information call 1-888-999-4747 or visit www. homeandoffice. hp. com and select "warranty upgrades" under "product support. " 50 hp photosmart 120 user's manual Obtaining support worldwide Telephone support is free for 1 year in Asia and the South Pacific and 30 days in the Middle East and Africa. Please check for the details and conditions of phone support in your country or region by consulting website www. hp. com/cposupport/loc/regional. html. Alternatively, you can ask your dealer or call HP at the phone number indicated in this manual. [. . . ]