User manual COMET LABS ND52000

[. . . ] User Manual ND-52000 User Manual (Version: 1. 0. 0) ©Copyright 2005. December 8, 2005 TRADEMARKS COMET LABS® is a registered trademark of Comet Labs, Inc. Microsoft®, Windows ® and Internet Explorer® are registered trademarks of Microsoft Inc. All other brand or product names are trademarks of their respective companies or organizations. [. . . ] It offers the fastest disk access but does not have any protection of your data if the striped array fails. The disk capacity equals the number of disks in the array times the size of the smallest disk. - 51 - e. Linear Disk Volume You can combine two or more disks into one larger disk. Files will be saved on physical disks sequentially but does not have a disk failure file protection function. The overall capacity of linear disk is the sum of all disks. 6. 6. 2 Delete Disk Volume To delete a disk volume, select the disk volume to remove and click OK. - 52 - 6. 6. 3 Examine Disk Volume To examine a disk volume, select the disk volume to examine and click OK. You can check the Fix errors box and the server will fix errors automatically during disk checking. ü Disk Volume Operation Report After click OK on Examine Disk Volume page, a page like below will display to show the current status and information of disk volume operation. - 53 - 6. 6. 4 Format Disk Volume To format disk volume, select the disk volume to format and click OK. 6. 6. 5 View Disk & Volume Status You can view details of physical disks and logical volumes in the section. Note: When configuring disk volume, make sure there are no active users connecting to ND-52000 to avoid any potential damage to the disks. You can check all currently active users in Statistics & Logs--Active Users (refer to Chapter 6. 10. 1) and inform those users to logout before configuring disk volume. - 54 - 6. 7 User Management The files on ND-52000 can be shared among multiple users. For easier management and better control of users' access right, you have to organize users, user groups and their access right control. 6. 7. 1 Users The system has created the following users by default: OE Administrator By default, administrator has access to system administration and cannot be deleted. · Guest This is a built-in user and will not be displayed on User Management page. When you use a non-registered user name to login, the server will recognize the user as a guest and will allow limited access. A guest does not belong to any user group. Z Anonymous This is a built-in user and will not be displayed on User Management page. When you connect to the server by FTP service, you can use this name to login as a guest. - 55 - 512 users can be created at maximum (including system default users). The following information is required to create a new user: ü User name The user name must not exceed 32 characters. It is case-insensitive and can contain double-byte characters, such as Chinese, Japanese, and Korean except: " / \ [ ] : ; | = , + * ?< >` ' ü Password The password is case-sensitive and can be 16 characters long at maximum. You can perform the following settings for users: - 56 - 6. 7. 2 User Groups User group is a collection of users with the same access right to files or folders. ND-52000 has created the following user groups by default: OE Administrators All members in this group have administration right. You cannot delete this group. · Everyone All registered users belong to everyone group. You cannot delete this group. You can manage user groups with the following options: User groups name must not exceed 256 characters. It is case-insensitive and can contain double-byte characters, such as Chinese, Japanese, and Korean, except the following ones: " / \ [ ] : ; | = , + * ?< >` ' To properly manage security, it is very important to manage users and user groups. You may set the share access parameters of each user or user group accordingly. - 57 - Create Users and Assign Users to User Group The following example demonstrates how to create new users and assign users to a user group. The IT Department therefore needs to create two user accounts for them to access company data on ND-52000. [. . . ] Make sure the user name with administrator access right to that domain. - 132 - 3. When the following message appears after applying the settings in step 2, check the DNS IP. When the following message appears after applying the settings in step 2, domain name, domain user name, and the password. When the following message appears after applying the settings in step 2, check the time zone settings. Make sure the difference of your time and that of AD server is less than 5 minutes. If the time difference is larger than 5 minutes, you will not be able to add the domain member. - 133 - 4. Upon successful adding of domain member, you can view the list for domain users and local users in User Management. 5. Go to Access Control in Network Share Management to configure the access control right of AD users for all available network shares. - 134 - Using AD users to access services To access services like FTP, Network Neighborhood, or Apple Talk with an AD user account, add DomainName\ before the user name when logging in. - 135 - Adding ND-52000 to Windows Server 2000 NT Domain 1. Go to Microsoft Networking to enable NT Domain member and then enter the domain name such as sub1 and the user who has administrator access right for identification. Note: a. [. . . ]