User manual COMET LABS ND16000

[. . . ] Network Attached Storage ND16000 Series User Manual (Version: 1. 0) FOREWORD Thank you for choosing COMET LABS products!LIMITED WARRANTY In no event shall the liability of COMET LABS Systems, Inc. (COMET LABS) exceed the price paid for the product from direct, indirect, special, incidental, or consequential software, or its documentation. COMET LABS makes no warranty or representation, expressed, implied, or statutory, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. [. . . ] Q-RAID 1: Select this option to configure the selected USB disk with the SATA disk in ND16000 as Q-RAID1 configuration. When backup is executed once, data can be automatically backed up by connecting the external disk to ND16000 directly. There is no need to configure the settings in administration interface. Manual operation is required for the first time backup to enhance secure data protection. Note: Only one disk can be set as Q-RAID 1 at one time. - 48 - Recover data from USB disk when the SATA disk of ND16000 fails: When the SATA disk of ND16000 fails, you can recover data from a backup disk if the disks have been previously configured as Q-RAID 1. Please follow the steps below to recover data from a backup USB disk to ND16000. Format the new disk by clicking Format now in Device Configuration-SATA Disk page. Warning: After executing this function, all data different from the USB disk will be removed from the SATA disk of ND16000. *This button will appear when the following conditions are all met: a. The SATA disk in ND16000 has been changed or the plugged in USB disk has been configured as Q-RAID 1 in other servers. No Q-RAID1 disk is currently running on ND16000. - 49 - 3. 5. 3 USB Printer 1. To provide printer sharing function for network users, you can simply connect a USB printer to the USB port of ND16000. When finished, you can start to use network printer service of ND16000. - 51 - 3. 5. 4 eSATA Disk ND16000 supports eSATA disk for extended storage and Q-RAID 1 function. Data Sharing: Select this option to use the selected eSATA disk as a network share of ND16000. Q-RAID 1: Select this option to configure the selected eSATA disk with the SATA disk in ND16000 as Q-RAID1 configuration. When backup is executed once, data can be automatically backed up by connecting the external disk to ND16000 directly. There is no need to configure the settings in administration interface. Manual operation is required for the first time backup to enhance secure data protection. Note: Only one disk can be set as Q-RAID 1 at one time. - 52 - Recover data from eSATA disk when the SATA disk of ND16000 fails: When the SATA disk of ND16000 fails, you can recover data from a backup disk if the disks have been previously configured as Q-RAID 1. Please follow the steps below to recover data from a backup eSATA disk to ND16000. Format the new disk by clicking Format now in Device Configuration-SATA Disk page. Warning: After executing this function, all data different from the eSATA disk will be removed from the SATA disk of ND16000. *This button will appear when the following conditions are all met: a. The SATA disk in ND16000 has been changed or the plugged in USB disk has been configured as Q-RAID 1 in other servers. No Q-RAID1 disk is currently running on ND16000. - 53 - 3. 6 User Management The files on ND16000 can be shared among multiple users. [. . . ] The program will start to copy the selected files to the specified share folder on ND16000. - 107 - File Filter Click File Filter on NetBak Replicator main page to select file format to be skipped from backup. Then click OK. - 108 - Schedule Click Schedule on NetBak Replicator main page. Then check the box "Enable Backup Schedule" and select the frequency and time for backup. Click OK to confirm. - 109 - Monitor Select a folder for monitoring. [. . . ]