User manual COBRA MT 600 QUICK START GUIDE

[. . . ] Insert round connector of wall charger into the charge jack located at the top of the radio. The wall charger has two (2) round connectors which enables you to charge either one (1) or two (2) radios at a time. Insert Connector Use only the supplied rechargeable batteries and wall charger for recharging your Cobra microTALK® radio. Non-rechargeable alkaline batteries can also be used. Radio Power To Turn Your Radio On: ­ Press and hold the MODE/POWER button until you hear a series of audible tones indicating that the radio is On. [. . . ] When your desired privacy code is displayed, choose one of the following: a. Press the MODE button to enter the new setting and proceed to other functions. Press the LOCK button to enter the new setting and return to LISTENING MODE. Do not press any buttons for 15 seconds to enter the new setting and return to LISTENING MODE. Mode Button Select VOX Channel Buttons Mode Button English DCS OFF Select Privacy Code Channel Buttons Voice Activated Transmit (VOX) In VOX Mode, your microTALK® radio can be used "hands-free, " automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. To Turn VOX Mode On or Off: 1. When your desired VOX Mode setting is displayed, choose one of the following: a. Press the MODE button to enter the new setting and proceed to other functions. Press the LOCK button to enter the new setting and return to LISTENING MODE. Do not press any buttons for 15 seconds to enter the new setting and return to LISTENING MODE. MODE FUNCTIONS OPERATION Mode Button Select VOX Sensitivity Level Channel Buttons English To Set the VOX Sensitivity Level: 1. Press the MODE button until the VOX icon flashes and the current sensitivity level is displayed. The current sensitivity level is displayed with the letter "L" and a number 1 to 5, 5 being the most sensitive level and 1 being the least sensitive level. Press the CHANNEL UP or CHANNEL DOWN button to change the setting. 3. When your desired VOX sensitivity level is displayed, choose one of the following: a. Press the MODE button to enter the new setting and proceed to other functions. Press the LOCK button to enter the new setting and return to LISTENING MODE. Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel on which, during scanning, you last transmitted or received. MODE FUNCTIONS OPERATION Select Channel Mode Button English CTCSS Privacy Code Scan Your microTALK® radio can automatically scan the CTCSS privacy codes (01 to 38) within one (1) channel. While in LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the channel on which you wish to scan the CTCSS privacy codes. Press the MODE button until the Scan icon, CTCSS icon and the small numbers flash on the display. Press the CHANNEL UP or CHANNEL DOWN button to begin scanning CTCSS privacy codes within the channel you selected. Select Scan Privacy Codes Channel Buttons The Scan icon will continue to be displayed when CTCSS privacy code scan is On. Your radio will continue to scan CTCSS privacy codes and stop as an incoming transmission is detected. While setting CTCSS privacy code scan, if you do not press any buttons for 15 seconds, your radio will automatically return to LISTENING MODE on the channel/privacy code that was displayed before you entered Mode Functions. During An Incoming Transmission, You Can Choose From The Following: a. [. . . ] Press the MODE button to enter the new setting and return to LISTENING MODE. Press the LOCK button to enter the new setting and return to LISTENING MODE. Do not press any buttons for 15 seconds to enter the new setting and return to LISTENING MODE. The setting you select will be saved when you turn your radio off and on again. [. . . ]