User manual COBRA CJS 50

[. . . ] This warranty may be enforced by the first consumer purchaser, provided that the product is utilized within the U. S. A. Cobra will, without charge, repair or replace, at its option, defective jump starter/power pack products or component parts upon delivery to the Cobra Factory Service department, accompanied by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt. You must pay any initial shipping charges required to ship the product for warranty service, but the return charges will be at Cobra's expense, if the product is repaired or replaced under warranty. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. [. . . ] Operating the jump start feature for more than 5 seconds may cause damage to the unit. Allow the power pack to cool down for at least 3 minutes after each jump start. WARNING: Risk of explosion, fire or burns The battery terminals exposed at the jump start cable port have enough energy present to cause a spark, creating an explosion hazard, or to cause burns if a metal object contacts both terminals. CAUTION: Equipment damage Do not expose the power pack to temperatures over 104° F(40° C) or under 14° F(-10° C). Introduction 7. Someone should be within range of your voice, or close enough to come to your aid when you work near batteries. Have plenty of fresh water, soap and a supply of baking soda on hand in the area of the batteries in case of contact with battery acid. The product is supplied with a rechargeable, sealed lead acid battery. Batteries must be disposed of properly when they no longer hold a charge. For information on battery recycling call toll free 800-822-8837. Precautions when working with batteries WARNING: Explosion and fire hazard 1. Follow all instructions published by the battery manufacturer and the manufacturer of the equipment in which the battery is installed. Never smoke or allow a spark or flame in vicinity of the engine or batteries. Be careful not to drop a metal object on the battery or allow a metal tool to simultaneously touch the positive and negative cable ends or battery terminals. It might spark or short-circuit the battery or other electrical parts and cause an explosion. Remove personal metal items such as rings, bracelets, necklaces, and watches when working with batteries. Batteries produce a short-circuit current high enough to weld a ring or other similar objects to metal, causing a severe burn. If you need to remove a battery, always remove the negative terminal from the battery first. USB power indicator Provides 5 volt output voltage for consumer electronics devices. 12V DC socket Introduction Red LED indicates jump start connection to battery is incorrect. USB/LED power switch If the switch is flipped left, the USB port can provide power. When the battery is being charged, this LED indicator lights red, when the battery is fully charged, the LED indicator lights green. Connect the black negative (-) clamp of the cables to the engine block, cylinder head, or other stationary heavy metal part of the motor. If the red "Reverse Polarity" LED illuminates, then reverse polarity has been detected. [. . . ] It will be necessary to furnish the following to have the product serviced and returned. For warranty repair include some form of proof-of-purchase, such as a mechanical reproduction or carbon copy of a sales receipt. Enclose a description of what is happening with the jump starter/power pack. Include a typed or clearly printed name and address of where the unit is to be returned. [. . . ]