User manual CLIFFORD PRIME LEVEL 2-4-5

[. . . ] Color profile: Disabled Composite Default screen Welcome to the world of high-technology vehicle security and convenience The remote controls of your Clifford Prime security upgrade are each powered by a 3-volt lithium battery. Your system is supplied with two remotes: one with symbols, the other has words. [. . . ] See the Valet Mode section for details on this feature. Opt+UnLock buttons. The LED will stay on to If so equipped, press the (for manual transmission, see the next item). See the Lock+UnLock buttons to remotely start the engine section of the IntelliStart 4 users manual for details on this feature. If your system does not have this feature, the optional IntelliStart 4 accessory can be added. DOs and DONTs If so equipped, simultaneously press the remote engine starting LowBattery/ LowTemp AutoStart or the manual transmission SafeStart functions noted in the IntelliStart 4 operations manual. Lock+Panic buttons to engage the If equipped with the SmartWindows 4 option, pressing the immediately after remote unlocking will open the windows. Or, right after locking, this combination vents the windows slightly while the system remains armed. Opt+Panic buttons 2 D:. . . 31-923 level 3 owners. vp Mon Jul 26 16:08:37 1999 Color profile: Disabled Composite Default screen Automatic remote control low-battery warning If your remote control battery is low, youll hear 5-beeps when you disarm instead of the usual one beep. Replacement batteries are available from your new vehicle dealer or any Authorized Clifford Dealer. Starter AutoImmobilization While armed, the starter motor is electronically immobilized. An optional triple-point upgrade is available to additionally immobilize the ignition system and fuel pump for enhanced security. Flashing = Armed & Locked LED status indicator Off = Disarmed and unlocked On = Valet mode Optional CliffNet WizardTM & DataPort Interface Connector If you opted to have the Clifford DataPort interface connector installed, you can use our CliffNet Wizard software to access your Prime system through your Windows 95/98 PC or your Windows CE palmtop. CliffNet Wizard will show you right on the screen, all programmable feature settings. You can change settings, customize features, add or delete remote controls, change remote control button assignments, view a chronological history of trigger and sensor activations, and much more. To learn more and download this free software, go to www. clifford. com/wizard. ! 3 D:. . . 31-923 level 3 owners. vp Mon Jul 26 16:08:37 1999 Color profile: Disabled Composite Default screen User-Selectable AutoLock and AutoUnLockTM For safety, the power door locks automatically lock the instant you turn on the ignition. When you turn the ignition off, they automatically unlock (some vehicles are incompatible with these features). Smart prior intrusion attempt alert If you hear 3 beeps when you disarm instead of the usual 1 beep, it means that the alarm sounded while you were away. Approach with caution. If a door is ajar when you remotely arm, youll hear the usual 2 beeps, then, 5 seconds later, there will be AutoArmingTM Smart AutoTestingTM 4 more beeps (this warning is not possible on vehicles that have delayed or dimming courtesy lights). This passive arming feature can be turned on (it is factory turned off) to automatically arm and lock 30 seconds after exiting if you forget to use the remote. [. . . ] The LED will turn off. User-selectable features Many of your Prime systems features can be changed via a programming procedure. To do so, request programming instructions by calling Clifford Prime Customer Service toll-free at 877-48-PRIME or download from www. clifford. com/prime. Or use the CliffNet Wizard Windows software (see page 3). 877-48-PRIME www. clifford. com/prime © Clifford Electronics 1999 $ 31-921B/P245om/0799 6 D:. . . 31-923 level 3 owners. vp Mon Jul 26 16:08:39 1999 [. . . ]