User manual CLIFFORD BULLET 2

[. . . ] World-Class Auto Security TM bULLET Owner's Manual II Table of Contents Standard Features of the Bullet II . . . . . . . . . . . . . . . . . . . 13 Smart prior intrusion attempt alert FACT -- False Alarm Control and Test Smart trunk release option Headlight Reminder . 17 2 Standard Features of the Bullet II Lifetime Warranty --For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details). FACTTM--False Alarm Control and Test -- One of many patented Clifford innovations, FACT absolutely, positively ends recurring false alarms. A Pair of 4-Button/12-Channel Remote Controls --Fingertip command from a typical range of 100 feet. Anti-CodeGrabbingTM (ACG) with Random Code Encryption -- A code-grabber is a new device that lets a thief record and capture off the air from a distance the digital code transmitted by your remote control whenever you arm your car. When you leave, the thief replays the code to disarm the alarm and unlock your car's doors. [. . . ] To activate Instant AutoArming Bypass, rapidly turn the ignition switch to "ON" then "OFF" twice. You will hear a single siren chirp to confirm that the system will not AutoArm. Your Bullet II will revert to its normal operating mode when you next start the engine. 10 Valet mode Whenever the system is put in valet mode, all of the system's security features are switched off. For instance, when having your car serviced, washed or parked by a valet. NOTE: If you temporarily lose the use of your remote controls, you can disarm the system by enabling valet mode. Turn the ignition switch to its "ON" position or start the engine. The system's LED will glow for on-going confirmation. To exit valet mode 1. Turn the ignition switch to its "ON" position or start the engine. The system's LED will turn off to confirm that the system is in its normal operating mode. Remote controlled valet mode entry and exit You can even remotely enable or exit valet mode. All you need to do is transmit channel 5 (one press of the side LevelShift button, then button 1). In addition to the previously noted indications, two parking light flashes will confirm that you have remotely enabled valet mode, while a single flash confirms exiting of valet mode. Keyless entry in valet mode Even in valet mode, you can still activate convenience features. Press button 1 as if you were disarming and the doors will unlock (indicated by one parking light flash) and the interior light will turn on. Selectable starter/ignition interrupt At the time of installation, you can select whether your Bullet II interrupts the starter line or the ignition line. The starter/ignition interrupt will be set in either Fault-Proof mode, which lets you start the engine even in the unlikely event of a complete system failure, or Super-Security mode that ensures a thief won't be able to start the engine even if he cuts all the wires or finds the system control unit and disconnects it. Changing the mode requires a minor relay wiring change and installer-only programming. Dual-Level Tamper Warning You may set the sytem to issue a rapid five-chirp warning, instead of the full alarm, whenever the system detects tampering. If there is any further tampering, or if a door, the hood or the trunk is opened at any time, your system will sound the full alarm. See User-selectable features on page 15-16. 11 AutoLock/AutoUnLockTM For your safety and that of your passengers, the vehicle doors will automatically lock the instant you turn on the ignition to start the engine (see User-selectable features on pages 15-16). When you turn the ignition off to shut down the engine, the AutoUnLock feature automatically unlocks the doors. Magnetic Resonance SensorTM The Magnetic Resonance Sensor detects intrusion-related vibrations and impacts. For an even greater level of security, consider adding the optional Glass Tampering Sensor that detects any attempts to break any of the vehicle windows or the Proximity Sensor that detects any movement within the passenger compartment (highly recommended for convertibles and other soft-top vehicles). Smart AutoTestingTM Each time you remotely arm your Bullet II, it automatically performs an extensive test of all system triggers and sensors. If the hood or trunk is open when you remotely arm, the system will immediately alert you of the problem by sounding 4 chirps and 4 parking light flashes instead of the usual 2 and 2 (simply disarm, shut the hood or trunk and re-arm to reactivate monitoring of that trigger point). [. . . ] If your vehicle is to be serviced by a mechanic, just put the system in valet mode via the remote control (see Remote controlled valet mode entry and exit on page 11). If the mechanic needs to interrupt power, your system will automatically return to its valet mode state when power is restored; there will be no alarm activation and no need to provide your mechanic with your remote control and instructions on how to use it. 14 User-selectable features Your Bullet II vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table below and on the next page. [. . . ]