User manual CLIFFORD AVANTGUARD 5.1

[. . . ] AvantGuard 5. 1 O Owner's Guide limited lifetime consumer warranty Directed Electronics ("Directed") promises to the original purchaser to repair or replace with a comparable reconditioned model any Directed unit (hereafter the "unit"), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was professionally installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer's name, telephone number and address; the authorized dealers name, telephone number and address; complete product description, including accessories; the year, make and model of the vehicle; vehicle license number and vehicle identification number. All components other than the unit, including without limitation the siren, the remote transmitters and the associated sensors and accessories, carry a one-year warranty from the date of purchase of the same. This warranty is non-transferable and is automatically void if: the original purchaser has not completed the warranty card and mailed it within ten (10) days of the date of purchase to the address listed on the card; the unit's date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or construction. The warranty does not cover damage to the unit caused by installation or removal of the unit. [. . . ] Cliffnet Wizard is compatible with Microsoft Windows 2000/ME/XP/NT so most programming operations can be accomplished by pointing and clicking with a mouse. This eliminates the need for programming grids and lengthy programming sequences. For a complete guide to system programming using the Cliffnet Wizard refer to the Cliffnet Wizard help menu. The software is available for download at www. clifford. com. 22 manual programming instructions Be sure to document changes by taking note of all feature changes made in programming mode. Ignition on - Turn the ignition to the run position or start the engine. Enter PIN - Enter the factory preset PIN code 2 by pressing on the PlainView 2 Valet switch twice, then once. note: If the factory preset PIN has been changed, the new PIN must be entered. 3. Hold/Chirp/Release - After entering the PIN code, press and hold until a chirp is heard and the LED turns on, then release the button. You have now entered the feature selection position of the User Selectable Features grid. After a pause the siren will chirp the same number of times as the selected column for confirmation. Feature select - Press the same number of times as the desired feature. If the system chirps once, the feature has just turned off; if the system chips twice, the feature has just turned on. If the feature has more than two settings, continue pressing on the transmitter to toggle through the settings. To advance to the next feature in the same column, press the same number of times as the desired feature within 60 seconds; to change a feature in a different column begin at step 4 by entering the column number first and then the row 4. 5. 6. © 2 0 0 6 d i re c t e d e l e c t ro n i c s -- a l l r i g h t s re s e r v e d 23 number. to the Feature Descriptions sections of this guide for impornote: Refer tant notes and descriptions of the system features and programming. 7. Exit programming - To exit programming mode turn the ignition off or wait 60 seconds without pressing the PlainView 2 Valet switch. The siren will chirp three times to indicate programming mode has been exited. user selectable features Then Press First Press Add new remote (autolearn) Auto (passive) arm off/on Chirps off/on/quiet Auto lock off/ignition/rpm Auto unlock off/ignition Auto (passive) arm and lock off/on Siren duration 30/60/90 Second unlock off/on Not used Set PIN code (default = 2) Select siren sounds FACT II off/on Remote valet off/on Entry delay off/on Reset to default (except transmitter and valet code) Panic off/on New remote learn arm/disarm only New remote learn accessory A channel New remote learn accessory B channel New remote learn silent mode New remote learn remote valet New remote learn remote start* New remote learn window down/vent** Autostart setting* New remote learn (off/battery only/ accessory C channel temp only/ battery and temp) BlackJax off/on Clear all remotes * This feature is only available with IntelliStart connected. ** This feature is only available with optional SmartWindows connected. 24 user selectable features descriptions - column one add new remote (auto learn) Auto-learn new five-button remote controls to the system in the standard button configuration. Once you have entered the feature, press on the transmitter until you hear a confirmation chirp. auto (passive) arm - off/on Off: The transmitter must be used to arm the system. On: When the system sees the ignition turn off and the last protected entry (door, hood, or trunk) close, it will begin a 30-second countdown before arming itself. After the first five seconds, you will hear two chirps and the lights will flash. chirps - off/on/quiet Off: Chirps will not sound when arming/disarming the system. Quiet: Chirps will sound when arming/disarming the system but at a lower volume than normal. auto lock - off/ignition/rpm Off: The doors will not lock automatically. [. . . ] 3 times then 1 The LED will turn on and the siren will chirp 1 time. © 2 0 0 6 d i re c t e d e l e c t ro n i c s -- a l l r i g h t s re s e r v e d 43 Sensor test and adjustment mode is entered. To adjust Primary zone Press of the remote control. Siren chirps 2 times. of the remote control to lock adjustment. To adjust Warn-away zone Press . Siren chirps 1 time. Siren chirps 1 time if hit hard enough to activate sensor. 44 7. Adjust Warn-away zone Press . Siren chirps 2 times. [. . . ]