User manual CLIFFORD AVANTGUARD 5

[. . . ] AvantGuard 5 Owner's Guide limited lifetime consumer warranty Directed Electronics, Inc. ("Directed") promises to the original purchaser to repair or replace with a comparable reconditioned model any Directed unit (hereafter the "unit"), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was professionally installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer's name, telephone number and address; the authorized dealers name, telephone number and address; complete product description, including accessories; the year, make and model of the vehicle; vehicle license number and vehicle identification number. All components other than the unit, including without limitation the siren, the remote transmitters and the associated sensors and accessories, carry a one-year warranty from the date of purchase of the same. This warranty is non-transferable and is automatically void if: the original purchaser has not completed the warranty card and mailed it within ten (10) days of the date of purchase to the address listed on the card; the unit's date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or construction. [. . . ] If the system remains in Valet Mode, the LED will come back on and restart the 1 hour timer the next time the ignition is turned off. programming cliffnet wizard installation software programming Cliffnet Wizard provides access to all available system features and some that are not available when manually programming with the Valet switch. Cliffnet Wizard is compatible with Microsoft Windows 95/98/2000/ME/XP/NT so most programming operations can be accomplished by pointing and clicking with a mouse. This eliminates the need for programming grids and lengthy programming sequences. For a complete guide to system programming using the Cliffnet Wizard refer to the Cliffnet Wizard help menu. The software is available for download at www. directed. com. 22 manual programming instructions Be sure to document changes by taking note of all feature changes made in programming mode. Ignition on - Turn the ignition to the run position or start the engine. Enter PIN - Enter the factory preset PIN code 2 by pressing on the PlainView 2 Valet switch twice, then once. note: If the factory preset PIN has been changed, the new PIN must be entered. 3. Hold/Chirp/Release - After entering the PIN code, press and hold until a chirp is heard and the LED turns on, then release the button. You have now entered the feature selection position of the User Selectable Features grid. After a pause the siren will chirp the same number of times as the selected column for confirmation. Feature select - Press the same number of times as the desired feature. If the system chirps once, the feature has just turned off; if the system chips twice, the feature has just turned on. If the feature has more than two settings, continue pressing on the transmitter to toggle through the settings. To advance to the next feature in the same column, press the same number of times as the desired feature within 60 seconds; to change a feature in a different column begin at step 4 by entering the column number first and then the row 4. 5. 6. © 2 0 0 3 d i re c t e d e l e c t ro n i c s , i n c . 23 number. to the Feature Descriptions sections of this guide for impornote: Refer tant notes and descriptions of the system features and programming. 7. Exit programming - To exit programming mode turn the ignition off or wait 60 seconds without pressing the PlainView 2 Valet switch. The siren will chirp three times to indicate programming mode has been exited. user selectable features First Press 1x Add new remote (autolearn) Auto (passive) arm on/off Chirps on/off/quiet Auto lock ignition/off/rpm Auto unlock ignition/off Auto (passive) arm and lock on/off Siren duration 30/60/90 Second unlock on/off Not used Then Press 1x 2x 3x 4x 5x 6x 7x 8x 9x 2x Set PIN code (default = 2) Select siren sounds FACT II on/off Remote valet on/off Entry delay on/off Reset to default (except transmitter and valet code) Panic on/off Autostart setting* (off/battery only/ temp only/ battery and temp) BlackJax on/off 3x New remote learn arm/disarm only New remote learn accessory A channel New remote learn accessory B channel New remote learn silent mode New remote learn remote valet New remote learn remote start* New remote learn window down/vent** New remote learn accessory C channel Clear all remotes * This feature is only available with optional IntelliStart connected. ** This feature is only available with optional SmartWindows connected. 24 user selectable features descriptions - column one add new remote (auto learn) Auto-learn new five-button Radar2 remote controls to the system in the standard button configuration. auto (passive) arm - on/off On: When the system sees the ignition turn off and the last protected entry (door, hood, or trunk) close, it will begin a 30-second countdown before arming itself. After the first five seconds, you will hear two chirps and the lights will flash. chirps - on/off/quiet On: Chirps will sound when arming/disarming the system. Quiet: Chirps will sound when arming/disarming the system but at a lower volume than normal. auto lock - ignition/off/rpm Ignition: The doors will automatically lock three seconds after the ignition is turned on unless a door is open at that time. Rpm: The doors will lock when the system sees the engine reach a preprogrammed RPM. © 2 0 0 3 d i re c t e d e l e c t ro n i c s , i n c . on the transmitter until you hear a confirmation chirp. Press again until you hear two chirps indicating the new remote is 25 auto unlock - ignition/off Ignition: The doors will automatically unlock as soon as the ignition is turned off. [. . . ] 2. Disarm system Transmit Channel 15 (Press 3 times then © 2 0 0 3 d i re c t e d e l e c t ro n i c s , i n c . 43 1 time). Adjust Primary zone Press of the remote control. Siren chirps 2 times. of the remote control to lock adjustment. Adjust Warn-away zone Press . Siren chirps 1 time. Siren chirps 1 time if hit hard enough to activate sensor. 44 7. Adjust Warn-away zone Press . Siren chirps 2 times. [. . . ]