User manual CLIFFORD ARROW 2

[. . . ] With Clifford's unique ACG, each time you use the remote control a different random code is transmitted, yet your system will flawlessly recognize and respond to your transmitter's new code and ignore all others. Full-Time Remote Panic with Automatic Door Locking/Unlocking-- If you feel threatened, you can, with just a fingertip touch on your remote control, sound the siren, flash the parking lights and unlock your vehicle's power door locks for quick entry into your car without fumbling with your keys. If you press the panic button while driving, the siren will sound, the lights will flash and the doors will lock to shield you from the assailant (some vehicles require optional relays to control the power locks). Dual-Mode Chirp Muting-- You can silence the usual arm/disarm chirp confirmations on the go and without any pre-planning with just a press of both buttons on the remote control. [. . . ] In addition, the doors will automatically unlock* and the interior lights will turn on* and stay on for 30 seconds or until you start the engine, whichever occurs first. The system will arm or disarm with all the indications noted above except the chirp acknowledgments. Button II can control a remote trunk release or other optional accessory, such as headlight activation feature of the NightVision Headlight Automation System, remote power window operation via the SmartWindows accessory, or operate your garage door opener via Clifford's Garage Door Receiver. The parking lights will flash and the siren will blare for 30 seconds, or until you press button I again to turn it off. If the ignition is on (indicating you are in the car), the doors will lock* to prevent an assailant from entering. If the ignition is off, the doors will unlock, * allowing you to enter immediately without fumbling with your keys. * Some vehicle require optional relays. . TO REMOTELY OPEN THE TRUNK OR TO ACTIVATE A DIFFERENT OPTION . TO ACTIVATE THE PANIC FEATURE . . Optional Anti-CodeGrabbingTM (ACGTM) remote control(s) ACG is an optional Clifford exclusive that protects you and your automobile from the most effective and onerous car stealing device ever used by car thieves -- a code-grabber. Code-grabbers literally record, from hundreds of feet away, the code sent by your car alarm remote control. Then the thief simply plays back the code when you're gone, instantly disarming the alarm and unlocking the doors. All you need is one or more optional Clifford 4-button/12-channel ACG remote controls. These ACG remote controls use complex digital signal processing and unbreachable encryption to randomly change the digital code every time you use the remote control. Your remote will never transmit the same code twice, and the control unit will never accept the same code twice. Arrow II has these additional features: AutoArming enable/disable: If you prefer, you may deactivate or reactivate the AutoArming feature. See User-selectable features on page 10. Visual acknowledgment: Five seconds after you exit the vehicle and close all the doors, the parking lights will flash twice to confirm that the AutoArming countdown is progressing. Then, 25 seconds later, the system will AutoArm. AutoArm & Lock: To ensure you can't accidentally lock your keys inside the car, the system is factory-set not to lock the doors upon AutoArming. To change this setting, see User-selectable features on page 10. Instant AutoArming bypass: Prevents AutoArming when fueling and other times when you wish to temporarily bypass AutoArming. To activate Instant AutoArming Bypass, rapidly turn the ignition switch to "ON" then "OFF" twice. You'll hear a siren chirp to confirm that the system will not AutoArm. Your Arrow II will revert to normal operating mode when you next start the engine. Valet mode Whenever the system is put in valet mode, all of the system's security features are switched off. For instance, when having your car serviced, washed or parked by a valet. NOTE: If you temporarily lose the use of your remote controls, you can disarm the system by enabling valet mode. [. . . ] If noted, wait for the "Program completion confirmation. " 4. Repeat steps 1-4 for any other feature you wish to program. Factory # of setting flicks ON OFF OFF ON 4 5 6 12 Program completion confirmation 1 chirp = OFF 2 chirps = ON 1 chirp = OFF 2 chirps = ON 1 chirp = ON 2 chirps = OFF 1 chirp = OFF 2 chirps = ON 1 chirp Feature AutoArming AutoArm & Lock Long-Term Chirp Silencing FACT Add a new remote to channel 1 (arm/disarm) Add a new remote to channel 2 (remote accessory) Add a new remote to channel 3 (silent arm/disarm) Add a new remote to channel 5 (remote controlled valet mode) Secondary action -- -- -- -- Press remote control button I Press remote control button II Simultaneously press both remote control buttons I+II (or button 3 of the optional ACG remote control) On the optional 12-channel remote, press LevelShift once, then press button 1 (channel 5) Wait 3 seconds for the 2-chirp confirmation before turning the ignition off 10 Result Change state from ON to OFF or vice-versa Change state from OFF to ON or vice-versa Change state from OFF to ON or vice-versa Change state from ON to OFF or vice-versa Button I/channel 1 code of the new remote has been memorized Buttons II/channel 2 code of the new remote has been memorized Buttons I+II/channel 3 code of the new remote has been memorized -- 13 -- 14 2 chirps -- 15 3 chirps -- 17 5 chirps Channel 5 code of the new remote control has been memorized All remote control codes have been erased; program in new remote controls Erase all channels -- 19 2 chirps Example : To change the AutoArming feature from its factory setting of "on" to "off, " you would do the following: · Turn the ignition key to the ON position. · Immediately flip the valet switch back and forth 4 times (you'll hear a chirp each time you flip the switch back and forth to help you count to the total of 4 chirps). To change the AutoArming setting back, just repeat the procedure. Adding new remote controls For other drivers in your family, or if you wish to control Clifford systems on your other cars with the same remote control, you can buy additional remote controls from any Clifford Dealer (or call our Customer Service Department at 800-824-3208) and program them into the system yourself. [. . . ]