User manual CLARITY C600

[. . . ] 2. 4 GHz Cordless Telephone with Caller ID Featuring Clarity ¤ Power" Technology Clarity C600 User Guide E N G L I S H E S P A Ñ O L F R A N Ç A I S Table of Contents Safety Instructions . . 3 5 8 8 8 10 10 10 10 11 11 11 12 12 12 14 14 14 14 14 14 14 14 15 15 15 15 15 15 Telephone Operations . . 16 16 16 16 16 17 17 17 17 17 18 18 18 19 19 19 19 19 20 20 20 21 22 23 24 Maintenance and Care . 31 Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons including the following: 1. [. . . ] Once the handset battery is fully charged, the handset will automatically select the code from over 65, 000 different combinations. The code is changed every time the handset is placed in the cradle. If you have trouble with placing or receiving calls, a lost security code may be the cause of the problem. When this occurs, the handset can no longer communicate with the base. E N G L I S H 17 Memory Storage Reset by placing the handset on the base for 5-10 seconds. If the phonebook is full, the display will show PHONEBOOK FULL for 1 second together with an error keynote. Then return to review mode. If memory is available, the display will show SAVE NEW NUM and then ENTER NUMBER. After pressing any number key, the second line will change to ENTER TO END and the third line shows the number(s) pressed. Enter phone number up to 23 digits, (RD/P treated as Pause, counted as one digit, shown as P). Press ENTER to confirm number. The LCD will display ENTER NAME and then the second line is blanked. Enter name up to 21 characters using key 2 to 9. I I I MEMORY OPERATIONS Review Phonebook Information 1. If the phonebook is empty, after 1 second the display shows - NO RECORDS -. Otherwise, the display will show the first alphabetical record with the record number on the top icon line. The record number may not be the first one. When at the end of phonebook list, press ing DOWN (M) button will show END OF LIST. Press MODE key twice. The display will show PHONEBOOK for 1 second and then display the first avaiable record. Press 2 once for A and twice for B. Press ENTER to confirm name. The LCD will display NUMBER STORED. Then it displays the just entered information. 18 Memory Storage Dialing a Phonebook Entry 1. Unit must be in standby mode and display is showing a phonebook record. The display will show MEM DELETED for 3 seconds together with a success keynote. The display will show the next available record or -NO RECORDS-. I I If the memory location is empty, pressing DEL key will have no action. sequence will time-out after 30 seconds if no key is pressed. I This Changing a Memory Number 1. Press MODE key twice. The display will show PHONEBOOK for 1 second and then display the first available record. Press the UP(L) or DOWN (M) button to go to the record to be changed, e. g. The display will show ENTER TO END and the stored number 567 with the blinking cursor after the digit 7. Or Press DEL/CH key to move the cursor to the digit 7. Then press other numeric key to replace 7. Or E N G L I S H If the memory location is empty, pressing DEL key will have no action. [. . . ] Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company s inside wiring associated with a single line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. [. . . ]