User manual CLARION MS3001

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CLARION MS3001. We hope that this CLARION MS3001 user guide will be useful to you.


CLARION MS3001 : Download the complete user guide (80 Ko)

Manual abstract: user guide CLARION MS3001

Detailed instructions for use are in the User's Guide.

[. . . ] Alert those in the vicinity of the vehicle by sounding the system's siren and flashing, parking lights, and honking the horn. Inform the owner when the system has been triggered and specifically which zone was violated. The system will also inform the user of any bad switches or sensors that may be causing the system to function improperly. Protect both you and the contents of your vehicle with features such as panic mode, dome light illumination, and ignition controlled door locking. Each Ungo MS3001 / MS3200 System comes with: · Main Unit - the "brain" of the system. [. . . ] ** If the Passive Locking feature is selected. To temporarily disable Passive Arming, you can turn the ignition key on then off, within 4 seconds. The status LED will stop flashing, and the system will not passively arm until the next time the key is on for more than 4 seconds. This feature is useful for turning off passive arming when refueling or washing your car or if you want to sit in your car and do not want the system to arm. Panic Mode Allows you to instantly trigger the alarm in an emergency situation by the Remote Transmitter. Press Button 1 again to stop Panic Mode. * If Panic Mode is not stopped by the Remote, it will automatically time out after 40 seconds, and the system will return to its prior Armed/Disarmed state. Page 8 - MS3001 / MS3200 Owner's Manual Emergency Override In case your Remote Transmitter becomes inoperable, or it is lost or stolen, you can still enter and drive your car by using the following procedure. Be sure that before you attempt this procedure you have your ignition key ready and that you know the location of the override switch. · Because the system is armed, the system will trigger and the siren will be sounding. You can now start and drive the car. Automatic System Rearming This feature, which can be turned on during the installation, insures the security of the system by protecting your car in case of an accidental disarm. If your system becomes disarmed due to an accidental press of the Disarm Button, the system will automatically rearm if no other activity is detected within one minute. One minute after Remote Disarming, the system will alert you with a 10 second series of chirps, then arm. (If the Passive Door Locking feature is selected during the installation, the system will also relock the doors. ) Any of the following will cancel Automatic System Rearming: · Turn on the ignition. · Activate Auxiliary Function 1 or 2. Automatic System Rearming is independent of Passive Arming and only takes place if the system was Armed (actively or passively) for at least 20 seconds and then Disarmed by the Remote Transmitter. Full Time System Diagnostics The system continuously monitors all protected zones, even when it is not armed, and warns you if it detects a problem when you turn off the ignition. The status LED will flash to indicate the zone where the problem has been detected. 1 2 3 4 flash flashes flashes flashes = = = = door Shock Sensor optional sensor hood / trunk MS3001 / MS3200 Owner's Manual - Page 9 Other Features Valet Mode Allows you to temporarily disable the security system when the car is being serviced or turned over to a parking attendant. · The siren will chirp once to indicate you have turned Valet Mode on. · The siren will chirp twice to indicate you have turned Valet Mode off. While Valet Mode is on, you can continue to lock and unlock your doors with the Remote Transmitters, as well as operate the Auxiliary Functions. For added protection, when the doors are locked by the Remote Transmitter, the system's Starter Disable circuit will activate and the LED will emit double flashes until the system is unlocked by the Remote. If the Remote Transmitter is lost, stolen, or becomes inoperable while the car is locked in Valet Mode, you can use the Emergency Override procedure to deactivate the Starter Disable circuit. Ignition Controlled Door Locking For added convenience and safety, this feature automatically locks your car's doors 10 seconds after the ignition key is turned on and unlocks the doors when the ignition key is turned off. Within 4 seconds, press Transmitter Button 2. The siren will chirp to indicate the setting. To prevent the keys from being locked inside the vehicle when Ignition Controlled Door Locking is on: · The system will not lock the doors if any door is open when the ignition is turned on. · The system will not lock the doors if any door is opened during the 10 second countdown. To prevent you from accidentally locking your keys inside the car: · The system will not automatically lock the doors if a door is open when the ignition key is turned on. · The system will not automatically lock the doors if a door is opened during the first 10 seconds after the ignition key is turned on. Page 10 - MS3001 / MS3200 Owner's Manual Dome Light Control As an option for increased safety and convenience, the system can be set, during the installation, to automatically turn on the dome light when you Disarm the system and when you turn off the ignition. [. . . ] (A) In no event shall Ungo security be liable for any loss or damages beyond the original purchase price of the Ungo system, and Ungo security specifically excludes any and all incidental and consequential damages, whether resulting from breach of warranty or contract, negligence or other conduct in connection with any sale, use, servicing or repair of a unit. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. ) (B) There are no warranties, express, statutory or implied, which extend beyond that which is described herein, and in particular, all implied warranties of merchantability and fitness for a particular purpose, and all warranties of title and against encumbrances, are expressly disclaimed, limited and excluded as permitted by law; but in no event shall any implied warranty, whether of merchantability of fitness for a particular purpose or otherwise, have a duration exceeding that of the express warranty made herein. (Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. ) (C) No agent, officer, employee or representative of Ungo Security, or any other person, has authority to make any representations, promises or warranties respecting Ungo Systems and their authorized accessories. (D) Owner has the right to bring any action at law or in equity to resolve disputes concerning, or to enforce, the provisions of this warranty. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CLARION MS3001




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CLARION MS3001 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.